Remove AnyProtect Online Backup (Uninstall Guide)

AnyProtect is a online backup program, which is promoted via other free downloads, and once installed it claims that you need to backup your personal files and folder.
However, if you try to do this, AnyProtect will state that you need to buy its full version before being able to do so.

AnyProtect is a paid online backup program that is typically added when you install another free software (video recording/streaming, download-managers or PDF creators) that had bundled into their installation this program. Very often users have no idea where did it come from, so it’s not surprising at all that most of them assume that AnyProtect is a virus.
This program is also bundled within the custom installer on many reputable download sites, so if you have downloaded a software from these websites, chances are that AnyProtect was installed during the software setup process.

AnyProtect by ClickMeIn Limited is a potentially unwanted program run by ironSource, a known distributor of web browser extensions and toolbars.
AnyProtect is a software program developed by CMI Limited. During setup, the program creates a startup registration point in Windows in order to automatically start when any user boots the PC. A scheduled task is added to Windows Task Scheduler in order to launch the program at various scheduled times (the schedule varies depending on the version). The primary executable is named anyprotect.exe. The setup package generally installs about 4 files and is usually about 19.95 MB (20,924,154 bytes). Relative to the overall usage of users who have this installed on their PCs, most are running Windows 7 (SP1) and Windows 8. While about 40% of users of AnyProtect come from the United States, it is also popular in Turkey and Brazil.

You should always pay attention when installing software because often, a software installer includes optional installs, such as this AnyProtect. Be very careful what you agree to install.
Always opt for the custom installation and deselect anything that is not familiar, especially optional software that you never wanted to download and install in the first place. It goes without saying that you should not install software that you don’t trust.

How to remove AnyProtect (Virus Removal Guide)

This page is a comprehensive guide, which will remove AnyProtect pop-ups from your computer, and any other adware program that may have been installed during the setup process.
Please perform all the steps in the correct order. If you have any questions or doubt at any point, STOP and ask for our assistance.
STEP 1: Uninstall AnyProtect program from your computer
STEP 2: Remove AnyProtect adware with AdwCleaner
STEP 3: Remove AnyProtect virus with Malwarebytes Anti-Malware Free
STEP 4: Double-check for the AnyProtect infection with HitmanPro

STEP 1 : Uninstall AnyProtect programs from your computer

In this first step, we will try to identify and remove any malicious program that might be installed on your computer.

1. To uninstall the AnyProtect program from Windows XP, Windows Vista or Windows 7, click the Start button, then click on the Control Panel menu option.
   
   If you are using Windows 8, simply drag your mouse pointer to the right edge of the screen, select Search from the list and search for “control panel” .Or you can right-click on a bottom left hot corner (formerly known as the Start button) and select Control Panel from there.
   
2. When the Control Panel window opens click on the Uninstall a program option under Programs category. This option is shown by the arrow in the image below. If you are using the Classic View of the Control Panel, then you would double-click on the Programs and Features icon instead.
   
3. When the Programs and Features or the Uninstall a Program screen is displayed, scroll through the list of currently installed programs and uninstall AnyProtect by CMI Limited and any other recently installed or unknown programs from your computer.
   To view the most recently installed programs, you can click on the “Installed On” column to sort your program by the installation date. Scroll though the list, and uninstall any unwanted or unknown programs.
   
   If you are having issues while trying to uninstall the AnyProtect program, you can use Revo Uninstaller to completly remove the unwated programs from your machine.

STEP 2: Remove AnyProtect adware from your computer with AdwCleaner

The AdwCleaner utility will scan your computer and web browser for the “AnyProtect” malicious files, browser extensions and registry keys, that may have been installed on your computer without your knowledge.

1. You can download AdwCleaner utility from the below link.
   ADWCLEANER DOWNLOAD LINK (This link will automatically download AdwCleaner on your computer)
2. Before starting AdwCleaner, close all open programs and internet browsers, then double-click on the AdwCleaner icon.
   
   If Windows prompts you as to whether or not you wish to run AdwCleaner, please allow it to run.
3. When the AdwCleaner program will open, click on the “Scan” button as shown below.
   
   AdwCleaner will now start to search for the “AnyProtect” malicious files that may be installed on your computer.
4. To remove the “AnyProtect” malicious files that were detected in the previous step, please click on the “Clean” button.
   
5. AdwCleaner will now prompt you to save any open files or documents, as the program will need to reboot the computer. Please do so and then click on the OK button.
   

STEP 3: Remove AnyProtect virus with Malwarebytes Anti-Malware Free

Malwarebytes Anti-Malware Free uses industry-leading technology to detect and remove all traces of malware, including worms, Trojans, rootkits, rogues, dialers, spyware, and more.
It is important to note that Malwarebytes Anti-Malware works well and should run alongside antivirus software without conflicts.

1. You can download download Malwarebytes Anti-Malware from the below link.
   MALWAREBYTES ANTI-MALWARE DOWNLOAD LINK (This link will open a new web page from where you can download Malwarebytes Anti-Malware Free)
2. Once downloaded, close all programs, then double-click on the icon on your desktop named “mbam-setup-consumer-2.00.xx” to start the installation of Malwarebytes Anti-Malware.
   
   You may be presented with a User Account Control dialog asking you if you want to run this file. If this happens, you should click “Yes” to continue with the installation.
3. When the installation begins, you will see the Malwarebytes Anti-Malware Setup Wizard which will guide you through the installation process.
   
   To install Malwarebytes Anti-Malware on your machine, keep following the prompts by clicking the “Next” button.
   
4. Once installed, Malwarebytes Anti-Malware will automatically start and you will see a message stating that you should update the program, and that a scan has never been run on your system. To start a system scan you can click on the “Fix Now” button.
   
   Alternatively, you can click on the “Scan” tab and select “Threat Scan“, then click on the “Scan Now” button.
   
5. Malwarebytes Anti-Malware will now check for updates, and if there are any, you will need to click on the “Update Now” button.
   
6. Malwarebytes Anti-Malware will now start scanning your computer for the AnyProtect virus. When Malwarebytes Anti-Malware is scanning it will look like the image below.
   
7. When the scan has completed, you will now be presented with a screen showing you the malware infections that Malwarebytes’ Anti-Malware has detected. To remove the malicious programs that Malwarebytes Anti-malware has found, click on the “Quarantine All” button, and then click on the “Apply Now” button.
   
   Please note that the infections found may be different than what is shown in the image.
8. Malwarebytes Anti-Malware will now quarantine all the malicious files and registry keys that it has found. When removing the files, Malwarebytes Anti-Malware may require a reboot in order to remove some of them. If it displays a message stating that it needs to reboot your computer, please allow it to do so.
   
   After your computer will restart, you should open Malwarebytes Anti-Malware and perform another “Threat Scan” scan to verify that there are no remaining threats

STEP 4: Double-check for the AnyProtect infection with HitmanPro

HitmanPro is a second opinion scanner, designed to rescue your computer from malware (viruses, trojans, rootkits, etc.) that have infected your computer despite all the security measures you have taken (such as anti-virus software, firewalls, etc.). HitmanPro is designed to work alongside existing security programs without any conflicts. It scans the computer quickly (less than 5 minutes) and does not slow down the computer.

1. You can download HitmanPro from the below link:
   HITMANPRO DOWNLOAD LINK (This link will open a new web page from where you can download HitmanPro)
2. Double-click on the file named “HitmanPro.exe” (for 32-bit versions of Windows) or “HitmanPro_x64.exe” (for 64-bit versions of Windows). When the program starts you will be presented with the start screen as shown below.
   
   Click on the “Next” button, to install HitmanPro on your computer.
   
3. HitmanPro will now begin to scan your computer for AnyProtect malicious files.
   
4. When it has finished it will display a list of all the malware that the program found as shown in the image below. Click on the “Next” button, to remove AnyProtect virus.
   
5. Click on the “Activate free license” button to begin the free 30 days trial, and remove all the malicious files from your computer.
   

Your computer should now be free of the AnyProtect infection. If your current anti-virus solution let this infection through, you may want to consider purchasing the Premium version of Malwarebytes Anti-Malware to protect against these types of threats in the future, and perform regular computer scans with HitmanPro.
If you are still experiencing problems while trying to remove AnyProtect adware from your machine, please start a new thread in our Malware Removal Assistan