Remove Total Antivirus 2020 malware (Virus Removal Guide)

Total Antivirus 2020 is a rogue antivirus program that displays false information to trick you into purchasing the program.

What is Total Antivirus 2020?

Total Antivirus 2020 is a malicious program that describes itself as an anti-malware product, however, this program will show fake error messages to trick you into thinking that your computer is infected with malware.

When installed, Total Antivirus 2020 will perform a fake scan and then state that there are numerous infections present. If you attempt to use the program to remove these infections, though, it will state that you first need to purchase it before it can do so. This is a scam as the scan results are all fake, and in many cases, the infected files do not even exist on your computer.

It’s important to remember that by purchasing the “claimed full version to remove the viruses” you will be submitting your personal information to unscrupulous persons and may also end up being a victim of credit card or identity fraud or theft.

How did Total Antivirus 2020 get on my computer?

Total Antivirus 2020 is installed by the users, whether that is knowingly or not. Often, this type of program is offered through advertisements or bundled with other software that is download from the Internet, leaving the user puzzled where this software came from.
Unfortunately, some free downloads do not adequately disclose that other software will also be installed and you may find that you have installed Total Antivirus 2020 without your knowledge.

You should always pay attention when installing software because often, a software installer includes optional installs. Be very careful what you agree to install.
Always opt for the custom installation and deselect anything that is not familiar, especially optional software that you never wanted to download and install in the first place. It goes without saying that you should not install software that you don’t trust.

To remove the Total Antivirus 2020 adware and check your computer for other malicious programs, please use the free malware removal guide below.

How to remove Total Antivirus 2020 (Virus Removal Guide)

This malware removal guide may appear overwhelming due to the number of steps and numerous programs that are being used. We have only written it this way to provide clear, detailed, and easy to understand instructions that anyone can use to remove malware for free.
Please perform all the steps in the correct order. If you have any questions or doubts at any point, stop and ask for our assistance.

• STEP 1: Start your computer in Safe Mode with Networking
• STEP 2: Use Malwarebytes Free to remove Total Antivirus 2020
• STEP 3: Use HitmanPro to scan for malware and unwanted programs
• STEP 4: Double-check for malicious programs with AdwCleaner

STEP 1: Start your computer in Safe Mode with Networking

In this first step, we will start your computer in Safe Mode with Networking to prevent Total Antivirus 2020 drivers and services from loading at Windows start-up. We’re using Safe mode because it starts Windows in a basic state, using a limited set of files and drivers.

STEP 2: Use Malwarebytes Free to remove Total Antivirus 2020

Malwarebytes Free is one of the most popular and most used anti-malware software for Windows, and for good reasons. It is able to destroy many types of malware that other software tends to miss, without costing you absolutely nothing. When it comes to cleaning up an infected device, Malwarebytes has always been free and we recommend it as an essential tool in the fight against malware.

1. Download Malwarebytes Free.

   While your computer is in Safe Mode with Networking, download Malwarebytes by clicking the link below.

   MALWAREBYTES DOWNLOAD LINK
   (The above link will open a new page from where you can download Malwarebytes)

2. Double-click on the Malwarebytes setup file.

   When Malwarebytes has finished downloading, double-click on the MBSetup file to install Malwarebytes on your computer. In most cases, downloaded files are saved to the Downloads folder.

   
   You may be presented with an User Account Control pop-up asking if you want to allow Malwarebytes to make changes to your device. If this happens, you should click “Yes” to continue with the Malwarebytes installation.
   

3. Follow the on-screen prompts to install Malwarebytes.

   When the Malwarebytes installation begins, you will see the Malwarebytes setup wizard which will guide you through the installation process. The Malwarebytes installer will first ask you on what type of computer are you installing this program, click either Personal Computer or Work Computer.
   

   On the next screen, click “Install” to install Malwarebytes on your computer.
   

   When your Malwarebytes installation completes, the program opens to the Welcome to Malwarebytes screen. Click the “Get started” button.

4. Select “Use Malwarebytes Free”.

   After installing Malwarebytes, you’ll be prompted to select between the Free and the Premium version. The Malwarebytes Premium edition includes preventative tools like real-time scanning and ransomware protection, however, we will use the Free version to clean up the computer.
   Click on “Use Malwarebytes Free“.
   

5. Click on “Scan”.

   To scan your computer with Malwarebytes, click on the “Scan” button. Malwarebytes will automatically update the antivirus database and start scanning your computer for malware.
   

6. Wait for the Malwarebytes scan to complete.

   Malwarebytes will scan your computer for adware and other malicious programs. This process can take a few minutes, so we suggest you do something else and periodically check on the status of the scan to see when it is finished.
   

7. Click on “Quarantine”.

   When the scan has completed, you will be presented with a screen showing the malware infections that Malwarebytes has detected. To remove the malicious programs that Malwarebytes has found, click on the “Quarantine” button.
   

8. Restart computer.

   Malwarebytes will now remove all the malicious files and registry keys that it has found. To complete the malware removal process, Malwarebytes will ask you to restart your computer.
   
   When the malware removal process is complete, your computer should start in normal mode (if not, simply restart your device to exit Safe Mode) and continue with the rest of the instructions.

STEP 3: Use HitmanPro to scan for malware and unwanted programs

HitmanPro is a second opinion scanner that takes a unique cloud-based approach to malware scanning. HitmanPro scans the behavior of active files and also files in locations where malware normally resides for suspicious activity. If it finds a suspicious file that’s not already known, HitmanPro sends it to their clouds to be scanned by two of the best antivirus engines today, which are Bitdefender and Kaspersky.

Although HitmanPro is shareware and costs $24.95 for 1 year on 1 PC, there is actually no limit in scanning. The limitation only kicks in when there is a need to remove or quarantine detected malware by HitmanPro on your system and by then, you can activate the one time 30-days trial to enable the cleanup.

1. Download HitmanPro.

   You can download HitmanPro by clicking the link below.

   HITMANPRO DOWNLOAD LINK
   (The above link will open a new web page from where you can download HitmanPro)

2. Install HitmanPro.

   When HitmanPro has finished downloading, double-click on “hitmanpro.exe” (for 32-bit versions of Windows) or “hitmanpro_x64.exe” (for 64-bit versions of Windows) to install this program on your PC. In most cases, downloaded files are saved to the Downloads folder.
   
   You may be presented with a User Account Control pop-up asking if you want to allow HitmanPro to make changes to your device. If this happens, you should click “Yes” to continue with the installation.

   

3. Follow the on-screen prompts.

   When HitmanPro starts you will be presented with the start screen as shown below. Click on the “Next” button to perform a system scan.
   

4. Wait for the HitmanPro scan to complete.

   HitmanPro will now begin to scan your computer for malicious programs. This process will take a few minutes.
   

5. Click on “Next”.

   When HitmanPro has finished the scan, it will display a list of all the malware that the program has found. Click on the “Next” button to remove the malicious programs.
   

6. Click on “Activate free license”.

   Click on the “Activate free license” button to begin the free 30 days trial and remove all the malicious files from your PC.
   
   When the process is complete, you can close HitmanPro and continue with the rest of the instructions.

STEP 4: Double-check for malicious programs with AdwCleaner

AdwCleaner is a free popular on-demand scanner which can detect and remove malware that even the most well-known anti-virus and anti-malware applications fail to find.
While the Malwarebytes and HitmanPro scans are more than enough, we’re recommending AdwCleaner to users who still have malware related issues or just want to make sure their computer is 100% clean.

1. Download AdwCleaner.

   You can download AdwCleaner by clicking the link below.

   ADWCLEANER DOWNLOAD LINK
   (The above link will open a new web page from where you can download AdwCleaner)

2. Double-click on the setup file.

   Double-click on the file named “adwcleaner_x.x.x.exe” to start AdwCleaner. In most cases, downloaded files are saved to the Downloads folder.
   
   You may be presented with a User Account Control dialog asking you if you want to run this file. If this happens, you should click “Yes” to continue with the installation.
   

3. Click on “Scan Now”.

   When AdwCleaner will start, click on the “Scan Now” button to perform a system scan.
   

4. Wait for the AdwCleaner scan to complete.

   AdwCleaner will now scan your PC for malicious files. This process can take a few minutes.
   

5. Click on “Clean & Repair”.

   When AdwCleaner has finished it will display a list of all the malware that the program found. Click on the “Clean & Repair” button to remove the malicious files from your computer.
   

6. Click on “Clean & Restart Now”

   When the malware removal process is complete, AdwCleaner may need to restart your device. Click on the “Clean & Restart Now” button to finish the removal process.
   

Your computer should now be free of the Total Antivirus 2020 malicious program. If your current antivirus allowed this malicious program on your computer, you may want to consider purchasing the full-featured version of Malwarebytes Anti-Malware to protect against these types of threats in the future.
If you are still having problems with your computer after completing these instructions, then please follow one of the steps:

• Run a computer scan with ESET Online Scanner
• Ask for help in our Windows Malware Removal Help & Support forum.