Your Cloud Storage Is Full Scam: Fake Storage Warning Explained

Remove Unwanted Apps and Malware from Windows

• STEP 1: Uninstall malicious programs from Windows
• STEP 2: Reset browsers back to default settings
• STEP 3: Use Malwarebytes Anti-Malware to remove malware and unwanted programs
• STEP 4: Use HitmanPro to scan your computer for badware
• STEP 5: Use AdwCleaner to remove adware and malicious browser policies

STEP 1: Uninstall malicious programs from Windows

In this first step, we will manually check if any unknown or malicious programs are installed on the computer. Sometimes adware and browser hijackers can have a usable Uninstall entry that can be used to remove them.

Now that the malicious programs have been removed from your computer, we can proceed with the next step in this guide.

STEP 2: Reset browsers back to default settings

In this step, we will remove spam notifications,  malicious extensions, and change to default any settings that might have been changed by malware.
Please note that this method will remove all extensions, toolbars, and other customizations but will leave your bookmarks and favorites intact. For each browser that you have installed on your computer, please click on the browsers tab below and follow the displayed steps to reset that browser.

STEP 3: Use Malwarebytes Anti-Malware to remove malware and unwanted programs

In this third step, we will install Malwarebytes to scan and remove any infections, adware, or potentially unwanted programs that may be present on your computer.

Malwarebytes stands out as one of the leading and widely-used anti-malware solutions for Windows, and for good reason. It effectively eradicates various types of malware that other programs often overlook, all at no cost to you. When it comes to disinfecting an infected device, Malwarebytes has consistently been a free and indispensable tool in the battle against malware. We highly recommend it for maintaining a clean and secure system.

1. Download Malwarebytes

   Download the latest version of Malwarebytes for Windows using the official link below. Malwarebytes will scan your computer and remove adware, browser hijackers, and other malicious software for free.

   

   MALWAREBYTES FOR WINDOWS DOWNLOAD LINK
   
   (The above link will open a new page from where you can download Malwarebytes)
2.  

   Install Malwarebytes

   After the download is complete, locate the MBSetup file, typically found in your Downloads folder. Double-click on the MBSetup file to begin the installation of Malwarebytes on your computer. If a User Account Control pop-up appears, click “Yes” to continue the Malwarebytes installation.

   

3. Follow the On-Screen Prompts to Install Malwarebytes

   When the Malwarebytes installation begins, the setup wizard will guide you through the process.

   • You’ll first be prompted to choose the type of computer you’re installing the program on—select either “Personal Computer” or “Work Computer” as appropriate, then click on Next.

     

   • Malwarebytes will now begin the installation process on your device.

     

   • When the Malwarebytes installation is complete, the program will automatically open to the “Welcome to Malwarebytes” screen.

     

   • On the final screen, simply click on the Open Malwarebytes option to start the program.

     

4. Enable “Rootkit scanning”.

   Malwarebytes Anti-Malware will now start, and you will see the main screen as shown below. To maximize Malwarebytes’ ability to detect malware and unwanted programs, we need to enable rootkit scanning. Click on the “Settings” gear icon located on the left of the screen to access the general settings section.

   

   In the settings menu, enable the “Scan for rootkits” option by clicking the toggle switch until it turns blue.

   

   Now that you have enabled rootkit scanning, click on the “Dashboard” button in the left pane to get back to the main screen.

5. Perform a Scan with Malwarebytes.

   To start a scan, click the Scan button. Malwarebytes will automatically update its antivirus database and begin scanning your computer for malicious programs.

   

6. Wait for the Malwarebytes scan to complete.

   Malwarebytes will now scan your computer for browser hijackers and other malicious programs. This process can take a few minutes, so we suggest you do something else and periodically check the status of the scan to see when it is finished.

   

7. Quarantine detected malware

   Once the Malwarebytes scan is complete, it will display a list of detected malware, adware, and potentially unwanted programs. To effectively remove these threats, click the “Quarantine” button.

   

   Malwarebytes will now delete all of the files and registry keys and add them to the program’s quarantine.

   

8. Restart your computer.

   When removing files, Malwarebytes may require a reboot to fully eliminate some threats. If you see a message indicating that a reboot is needed, please allow it. Once your computer has restarted and you are logged back in, you can continue with the remaining steps.

   

STEP 4: Use HitmanPro to scan your computer for badware

In this next step, we will scan the computer with HitmanPro to ensure that no other malicious programs are installed on your device.

HitmanPro is a second-opinion scanner that takes a unique cloud-based approach to malware scanning. HitmanPro scans the behavior of active files and also files in locations where malware normally resides for suspicious activity. If it finds a suspicious file that’s not already known, HitmanPro sends it to its clouds to be scanned by two of the best antivirus engines today, which are Bitdefender and Kaspersky.

Although HitmanPro is shareware and costs $24.95 for 1 year on 1 PC, there is no limit on scanning. The limitation only kicks in when there is a need to remove or quarantine detected malware by HitmanPro on your system and by then, you can activate the one-time 30-days trial to enable the cleanup.

1. Download HitmanPro.

   You can download HitmanPro by clicking the link below.

   HITMANPRO DOWNLOAD LINK
   (The above link will open a new web page from where you can download HitmanPro)

2. Install HitmanPro.

   When HitmanPro has finished downloading, double-click on “hitmanpro.exe” (for 32-bit versions of Windows) or “hitmanpro_x64.exe” (for 64-bit versions of Windows) to install this program on your computer. In most cases, downloaded files are saved to the Downloads folder.

   

   You may be presented with a User Account Control pop-up asking if you want to allow HitmanPro to make changes to your device. If this happens, you should click “Yes” to continue with the installation.

   

3. Follow the on-screen prompts.

   When HitmanPro starts you will be presented with the start screen as shown below. Click on the “Next” button to perform a system scan.

   

   

4. Wait for the HitmanPro scan to complete.

   HitmanPro will now begin to scan your computer for malicious programs.
   

5. Click on “Next”.

   When HitmanPro has finished the scan, it will display a list of all the malware that it has found. Click on the “Next” button to have HitmanPro remove the detected items.

   

6. Click on “Activate free license”.

   HitmanPro may now require to activate the free 30-days trial to remove the malicious files. To do this, click on the “Activate free license” button to begin the free 30 days trial and remove all the malicious files from your computer.
   

   When the malware removal process is complete, it will display a screen that shows the status of the various programs that were removed. At this screen, you should click on the Next button and then if prompted you should click on the Reboot button. If HitmanPro does not prompt you to reboot, please just click on the Close button.

STEP 5: Use AdwCleaner to remove adware and malicious browser policies

In this final step, we will use AdwCleaner to remove the malicious browser policies that were set by browser hijackers on your computer and delete malicious browser extensions.

AdwCleaner is a free popular on-demand scanner that can detect and remove malware that even the most well-known anti-virus and anti-malware applications fail to find. This on-demand scanner includes a lot of tools that can be used to fix the side effects of adware. browser hijackers and other malware.

1. Download AdwCleaner.

   You can download AdwCleaner by clicking the link below.

   

   ADWCLEANER DOWNLOAD LINK
   (The above link will open a new web page from where you can download AdwCleaner)

2. Double-click on the setup file.

   Double-click on the file named “adwcleaner_x.x.x.exe” to start AdwCleaner. In most cases, downloaded files are saved to the Downloads folder.
   

   AdwCleaner program will now open and you will be presented with the program’s license agreement. After you read it, click on the I agree button if you wish to continue. If Windows prompts you as to whether or not you wish to run AdwCleaner, please allow it to run.

   

3. Enable “Reset Chrome policies” to remove malicious browser policies.

   When AdwCleaner starts, on the left side of the window, click on “Settings” and then enable “Reset Chrome policies“.

   

4. Click on the “Scan” button.

   On the left side of the AdwCleaner window, click on “Dashboard” and then click “Scan” to perform a computer scan.

   

5. Wait for the AdwCleaner scan to finish.

   AdwCleaner will now scan your computer for malware. This process can take a few minutes.

   

6. Click on “Quarantine” to remove malware.

   When the AdwCleaner scan is completed it will display all of the items it has found. Click on the “Quarantine” button to remove the malicious programs from your computer.

   

7. Click on “Continue” to remove the malicious programs.

   AdwCleaner will now prompt you to save any open files or data as the program will need to close any open programs before it starts to clean. Click on the “Continue” button to finish the removal process.
   

   AdwCleaner will now delete all detected malware from your computer. When the malware removal process is complete, you may be asked to restart your computer.

Your computer should now be free of Unwanted Apps and Malware and other malware.

If your current antivirus allowed this malicious program on your computer, you may want to consider purchasing Malwarebytes Premium to protect against these types of threats in the future.
If you are still having problems with your computer after completing these instructions, then please follow one of the steps:

• Run a computer scan with ESET Online Scanner
• Ask for help in our Windows Malware Removal Help & Support forum.

Remove Unwanted Apps and Malware from Mac

• STEP 1: Remove malicious profiles
• STEP 2: Delete malicious apps
• STEP 3: Reset browsers back to default settings
• STEP 4: Run a scan with Malwarebytes for Mac to remove malware

STEP 1: Remove malicious profiles

Profiles are used by IT admins in businesses to control the behavior of their Macs. These profiles can configure a Mac to do many different things, some of which are not otherwise possible.
When it comes to home users, adware and browser hijackers are using the configuration profile to prevent users from removing malicious programs from the computer. This also prevents the user from changing that behavior in the browser’s settings.

In this first step, we will check your computer to see if any configuration profiles are installed. To do this, follow the below steps:

1. Open “System Preferences”

   From the Apple menu, select System Preferences.

2. Search for “Profiles”

   When the System Preferences window opens, search for the Profiles icon.
   

   If there isn’t a Profiles icon, you don’t have any profiles installed, which is normal and you can continue with the next steps.

3. Remove the malicious profiles

   If there’s a Profile icon, click on it and select any suspicious profile that you want to remove, and then press the – (minus) button. Click Remove to remove the profile.
   

STEP 2: Delete malicious apps

In this second step, we will try to identify and remove any malicious apps and files that might be installed on your computer. Sometimes redirects or adware programs can have usable Uninstall entries that can be used to remove these programs.

1. Quit the malicious programs

   On the Apple menu bar, in the top-right corner, if you see any unknown or suspicious icon, click on it and then select Quit.

2. Open “Finder”

   Click the Finder application on your dock.
   

3. Click on “Applications”

   In the Finder left pane, click on “Applications“.
   

4. Find and remove the malicious app.

   The “Applications” screen will be displayed with a list of all the apps installed on your device. Scroll through the list until you find the malicious app, right-click it, and then click “Move to Trash”.

   Look out for any suspicious program that could be behind all the drama – anything you don’t remember downloading or that doesn’t sound like a genuine program. Here are some known malicious programs: SearchMine, TakeFresh, TopResults, FeedBack, ApplicationEvents, GeneralOpen, PowerLog, MessengerNow, ImagePrime, GeneralNetSearch, Reading Cursors, GlobalTechSearch, PDFOnline-express, See Scenic Elf, MatchKnowledge, Easy Speedtest, or WebDiscover.

   

5. Click “Empty Trash”

   On the dock, right-click on the trash icon and select “Empty Trash”. Doing so deletes the Trash’s contents, including the program that you just sent to the Trash.
   

6. Find and remove the malicious files

   1. Click the desktop to make sure you’re in the Finder, choose “Go” then click on “Go to Folder“.
   2. Type or copy/paste each of the below paths into the window that opens, then click Go.
      • /Library/LaunchAgents
      • ~/Library/LaunchAgents
      • /Library/Application Support
      • /Library/LaunchDaemons

      

   3. Look out for any suspicious files that could be behind all the drama – anything you don’t remember downloading or that doesn’t sound like a genuine program. These are some known malicious files: “com.adobe.fpsaud.plist” “installmac.AppRemoval.plist”, “myppes.download.plist”, “mykotlerino.ltvbit.plist”, or “com.myppes.net-preferences.plist”. When you find a malicious file move it to the Trash.

STEP 3: Reset browsers back to default settings

In this third step, we will remove spam push notifications and malicious extensions, and change to default any settings that might have been changed by malware.
For each browser that you have installed on your computer, please click on the tab below and follow the displayed steps to reset that browser.

STEP 4: Run a scan with Malwarebytes for Mac to remove malware

In this final step, we will scan the computer with Malwarebytes for Mac to find and remove any malicious programs that might be installed on your Mac.

Malwarebytes for Mac is an on-demand scanner that can destroy many types of malware that other software tends to miss without costing you absolutely anything. When it comes to cleaning up an infected device, Malwarebytes has always been free, and we recommend it as an essential tool in the fight against malware.

1. Download Malwarebytes for Mac.

   You can download Malwarebytes for Mac by clicking the link below.

   

   MALWAREBYTES FOR MAC DOWNLOAD LINK
   (The above link will open a new page from where you can download Malwarebytes for Mac)

2. Double-click on the Malwarebytes setup file.

   When Malwarebytes has finished downloading, double-click on the setup file to install Malwarebytes on your computer. In most cases, downloaded files are saved to the Downloads folder.

   

3. Follow the on-screen prompts to install Malwarebytes.

   When the Malwarebytes installation begins, you will see the Malwarebytes for Mac Installer which will guide you through the installation process. Click “Continue“, then keep following the prompts to continue with the installation process.

   

   

   

   When your Malwarebytes installation completes, the program opens to the Welcome to Malwarebytes screen. Click the “Get started” button.

4. Select “Personal Computer” or “Work Computer”.

   The Malwarebytes Welcome screen will first ask you what type of computer are you installing this program, click either Personal Computer or Work Computer.
   

5. Click on “Scan”.

   To scan your computer with Malwarebytes, click on the “Scan” button. Malwarebytes for Mac will automatically update the antivirus database and start scanning your computer for malware.
   

6. Wait for the Malwarebytes scan to complete.

   Malwarebytes will scan your computer for adware, browser hijackers, and other malicious programs. This process can take a few minutes, so we suggest you do something else and periodically check on the status of the scan to see when it is finished.
   

7. Click on “Quarantine”.

   When the scan has been completed, you will be presented with a screen showing the malware infections that Malwarebytes has detected. To remove the malware that Malwarebytes has found, click on the “Quarantine” button.
   

8. Restart computer.

   Malwarebytes will now remove all the malicious files that it has found. To complete the malware removal process, Malwarebytes may ask you to restart your computer.
   
   

Your computer should now be free of Unwanted Apps and Malware and other malware.

If your current antivirus allowed a malicious program on your computer, you might want to consider purchasing the full-featured version of Malwarebytes Anti-Malware to protect against these types of threats in the future.
If you are still experiencing problems while trying to remove a malicious program from your computer, please ask for help in our Mac Malware Removal Help & Support forum.

Remove Unwanted Apps and Malware from Android

• STEP 1: Uninstall malicious apps
• STEP 2: Reset browsers back to default settings
• STEP 3: Use Malwarebytes for Android to remove malicious apps

STEP 1: Uninstall malicious apps

In this first step, we will check if any malicious apps are installed on your phone. Sometimes browser hijackers or adware apps can have usable Uninstall entries that can be used to remove these apps.

1. Open the “Settings” menu.

   Tap on the “Settings” app from your phone menu or home screen.
   

2. Tap on “Apps”.

   When the “Settings” menu opens, tap on “Apps” (or “App Manager”) to see all the installed applications on your phone.
   

3. Find the malicious app.

   The “Apps” screen will be displayed with a list of all the applications that are installed on your phone. Scroll through the list and look out for any suspicious app that could be behind all the drama – anything you don’t remember downloading or that doesn’t sound like a genuine program.
   Most often, cyber criminals hide malware inside video or photo editing apps, weather apps, and camera apps.

   

4. Uninstall the malicious app

   When you find a suspicious or malicious app, tap on it to uninstall it. This won’t start the app but will open up the app details screen. If the app is currently running press the “Force stop” button, then tap on “Uninstall”.
   

   A confirmation dialog should be displayed to confirm you want to uninstall the app, tap on “OK” to remove the malicious app from your phone.

   

STEP 2: Reset browsers back to default settings

In this second step, we will reset your browser to its default settings to remove spam notifications, unwated search redirects, and restore its factory settings

Resetting the browser settings to their default it’s an easy task on Windows or Mac computers; however, when it comes to Android, this can’t be done directly because it’s not an option built-in into the browser settings. Restoring the browser settings on Android can be done by clearing the application data. This will remove all the cookies, cache, and other site settings that may have been saved. So let’s see how we can restore your browser to its factory settings.

STEP 3: Use Malwarebytes for Android to remove malicious apps

In this final step, we will install Malwarebytes for Android to scan and remove malicious apps from your phone or tablet.

Malwarebytes for Android automatically detects and removes dangerous threats like malware and ransomware so you don’t have to worry about your most-used device being compromised. Aggressive detection of adware and potentially unwanted programs keeps your Android phone or tablet running smooth.

1. Download Malwarebytes for Android.

   You can download Malwarebytes for Android by clicking the link below.

   

   MALWAREBYTES FOR ANDROID DOWNLOAD LINK
   (The above link will open a new page from where you can download Malwarebytes for Android)

2. Install Malwarebytes for Android on your phone.

   In the Google Play Store, tap “Install” to install Malwarebytes for Android on your device.

   

   When the installation process has finished, tap “Open” to begin using Malwarebytes for Android. You can also open Malwarebytes by tapping on its icon in your phone menu or home screen.
   

3. Follow the on-screen prompts to complete the setup process

   When Malwarebytes will open, you will see the Malwarebytes Setup Wizard which will guide you through a series of permissions and other setup options.
   This is the first of two screens that explain the difference between the Premium and Free versions. Swipe this screen to continue.
   
   Tap on “Got it” to proceed to the next step.
   
   Malwarebytes for Android will now ask for a set of permissions that are required to scan your device and protect it from malware. Tap on “Give permission” to continue.
   
   Tap on “Allow” to permit Malwarebytes to access the files on your phone.
   

4. Update database and run a scan with Malwarebytes for Android

   You will now be prompted to update the Malwarebytes database and run a full system scan.

   

   Click on “Update database” to update the Malwarebytes for Android definitions to the latest version, then click on “Run full scan” to perform a system scan.

   

5. Wait for the Malwarebytes scan to complete.

   Malwarebytes will now start scanning your phone for adware and other malicious apps. This process can take a few minutes, so we suggest you do something else and periodically check on the status of the scan to see when it is finished.
   

6. Click on “Remove Selected”.

   When the scan has been completed, you will be presented with a screen showing the malware infections that Malwarebytes for Android has detected. To remove the malicious apps that Malwarebytes has found, tap on the “Remove Selected” button.
   

7. Restart your phone.

   Malwarebytes for Android will now remove all the malicious apps that it has found. To complete the malware removal process, Malwarebytes may ask you to restart your device.

Your phone should now be free of Unwanted Apps and Malware and other malware.

If your current antivirus allowed a malicious app on your phone, you may want to consider purchasing the full-featured version of Malwarebytes to protect against these types of threats in the future.
If you are still having problems with your phone after completing these instructions, then please follow one of the steps:

• Restore your phone to factory settings by going to Settings > General management > Reset > Factory data reset.
• Ask for help in our Mobile Malware Removal Help & Support forum.

Remove Unwanted Apps and Malware from iPhone and iPad

• STEP 1: Clean your browser
• STEP 2: Delete unwanted apps

STEP 1: Clean your browser

In this first step, we will clean your Safari browser by using the built-in “Clear History and Website Data” feature.
“Clear History and Website Data” allows you to delete the browsing history and website data that is stored on your device. This can include information such as the websites you have visited, your search history, and any data that has been stored by websites you have visited, such as cookies and cache.

1. Do not tap on the malicious browser window or pop-ups. Instead, tap on the tab icon located in the lower right corner of the screen, as shown in the image below.
   
2. Tap the X button on the tab or swipe up to safely close it.
   
3. Tap the Settings app.
   
4. Toggle on Airplane Mode to temporarily disconnect your phone from the internet and block unwanted access.
   
5. Scroll down and tap Safari.
   
6. Tap Clear History and Website Data.
   
7. Confirm that you want to clear the history and data by tapping “Clear History and Data” in the pop-up window.
   
8. While in Safari settings, make sure to toggle on Block Pop-ups and Fraudulent Website Warning.
   
9. Tap on Settings in the upper-left corner to return to the main Settings menu.
   
10. Toggle Airplane Mode back off to re-connect your phone to the internet.
    

STEP 2: Delete unwanted apps

In the next step, we will remove any potentially unwanted apps that may be installed on your iPhone. If you have downloaded an app after being redirected to the App Store by suspicious websites, it is recommended to delete it.

1. On the home screen, tap and hold on the app icon until all of the icons start to wiggle.

2. Tap the “X” button that appears on the top left corner of the app icon.

3. Confirm that you want to delete the app by tapping “Delete”.

That’s it, your iPhone should be clean and you can continue browsing the Internet. We recommend that you install an ad blocker like AdGuard [recommended] to block the malicious ads.

If you continue to have malware related issues with your device after completing the above steps, we recommend to take one of these actions:

• Perform a scan with with Malwarebytes for iOS
• Ask for help in our Mobile Malware Removal Help & Support forum.