Solved virus auto regenerating in appdata/localLow/Microsoft

[shimaaspa]

Hi, and thanks in advance for your advice.
I couldn't run aswmbr, so no log of that attached. The computer was running Microsoft Security Essentials, but that has been disabled by the virus. There are multiple files being created under *username*/appdata/LocalLow/ . Can't run malwarebytes, or malwarebytes anti-rootkit, or Avast installer, or Eset installer, or Eset online scanner, or ASWMBR.
Has multiple instances of Vrtpbhil.exe running , but not when in safe mode.
Cheers,
David

 

[TwinHeadedEagle]

Hello,



They call me TwinHeadedEagle around here, and I'll be working with you.



Before we start please read and note the following:

• At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
• Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
• Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
• Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.
  
• All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
• If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
• I visit forum several times at day, making sure to respond to everyone's topic as fast as possible. But bear in mind that I have private life like everyone and I cannot be here 24/7. So please be patient with me. Also, some infections require less, and some more time to be removed completely, so bear this in mind and be patient.
• Please stay with me until the end of all steps and procedures and I declare your system clean. Just because there is a lack of symptoms does not indicate a clean machine. If you solved your problem yourself, set aside two minutes to let me know.
  
• Please attach all report using
  
  button below. Doing this, you make it easier for me to analyze and fix your problem.
  
• Do not ask for help for your business PC. Companies are making revenue via computers, so it is good thing to pay someone to repair it.
• If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.

Download

Malwarebytes Anti-Rootkit to your desktop.

• Double-click the icon to start the tool.
• It will ask you where to extract it, then it will start.
• Warning! Malwarebytes Anti-Rootkit needs to be run from an account with administrator rights.
• Click in the introduction screen "next" to continue.
• Click in the following screen "Update" to obtain the latest malware definitions.
• Once the update is complete select "Next" and click "Scan".
• When the scan is finished and no malware has been found select "Exit".
• If malware was detected, make sure to check all the items and click "Cleanup". Reboot your computer.
• Open the MBAR folder and paste the content of the following files in your next reply:
  • "mbar-log-{date} (xx-xx-xx).txt"
  • "system-log.txt"

Scan with Farbar Recovery Scan Tool

Please re-run Farbar Recovery Scan Tool to give me a fresh look at your system.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Make sure that Addition option is checked.
• Press Scan button and wait.
• The tool will produce two logfiles on your desktop: FRST.txt and Addition.txt.

Please include their content into your next reply.

 

[shimaaspa]

Thankyou TwinHeadedEagle, I have just tried to run the Malwarebytes Antirootkit, however it will not run. (The account has administrator rights)

 

[TwinHeadedEagle]

What happens?

 

[shimaaspa]

I get the windows prompt "Do you want to run this file", click OK and then nothing...

 

[TwinHeadedEagle]

Then proceed with FRST scan only.

 

[shimaaspa]

OK, there are the files.

 

[TwinHeadedEagle]

Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

​

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Press the Fix button just once and wait.
• If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
• When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.

 

[shimaaspa]

OK that is done, file attached

 

[TwinHeadedEagle]

Very good. How is your PC now?

 

[shimaaspa]

The multiplying processes are no longer there, (yay) and the rogue folders/files in appdatal/LocalLow can now be deleted, so that is good. Other than that it seems ok, except that Microsoft Security Essentials still isn't running. I still can't run anti-malware programs. I didn't try a lot, just tried to install the malwarebytes anti-rootkit (same result as before), then tried to run the installer for Microsoft Security Essentials (same result).

 

[TwinHeadedEagle]

Scan with Farbar Recovery Scan Tool

Please re-run Farbar Recovery Scan Tool to give me a fresh look at your system.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Make sure that Addition option is checked.
• Press Scan button and wait.
• The tool will produce two logfiles on your desktop: FRST.txt and Addition.txt.

Please include their content into your next reply.

 

[shimaaspa]

ok, attached

 

[TwinHeadedEagle]

Scan with Malwarebytes' Anti-Malware

Please download Malwarebytes Anti-Malware and save it to your desktop.

• Install the progam and select update.
• Once updated, click the Settings tab, in the left panel choose Detection & Protection and tick Scan for rootkits.
• Click the Scan tab, choose Threat Scan is checked and click Scan Now.
• If threats are detected, click the Apply Actions button. You will now be prompted to reboot. Click Yes.
• Upon completion of the scan (or after the reboot), click the History tab.
• Click Application Logs and double-click the Scan Log.
• At the bottom click Export and choose Text file.

Save the file to your desktop and include its content in your next reply.

 

[shimaaspa]

Unfortunately Malwarebytes Anti-Malware won't install either, same as the anti-rootkit, I get the windows prompt "Do you want to run this file", click OK and then nothing... I tried it in safe mode as well, but no good.

 

[TwinHeadedEagle]

Scan with ComboFix

This is a very powerful tool that should be used only if advised by Malware Analyst.
Do not run ComboFix on your own!

Referring to this instruction, please download ComboFix by sUBs and save it to your desktop.
Temporary disable your AntiVirus and AntiSpyware protection - instructions here.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
• Accept the disclaimer and agree if prompted to install Recovery Console.
• Do not take any actions while ComboFix goes through your System - it may cause it to stall!
• This scan may take some time!
• When finished - it will display a logfile (located also on your main drive, usually C:\ComboFix.txt).

Include that log in your next reply.

If you'll encounter any issues with internet connection after running ComboFix, please visit this link.

If an error about operation on the key marked for deletion will appear after running the tool, please reboot your machine.

 

[shimaaspa]

here is the combofix log TwinHeadedEagle (I really appreciate your time and effort on this )

 

[TwinHeadedEagle]

Can you install programs now?

 

[shimaaspa]

No

 

[TwinHeadedEagle]

Scan with TDSSKiller

Please download TDSSKiller by Kaspersky and save it to your desktop.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
• Click on Change parameters and put a checkmark beside Loaded modules. A reboot will be needed to apply the changes, allow it to do so.
• Your machine may appear very slow and unusable after that - it's normal.
• TDSSKiller will run automaticaly. Click on Change parameters and click OK.
• Click the Start Scan button and wait patiently.

If anything will be found follow this guidelines:

• If a suspicious object is detected, the default action will be Skip, click on Continue.
• If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.
  Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.
  If Cure is not available, please choose Skip instead.
• Do not choose Delete unless instructed!

A report will be created in your root directory, (usually C:\ drive) in the form of TDSSKiller.[Version]_[Date]_[Time]_log.txt. Please include the contents of that file in your next post.

Scan with Farbar Recovery Scan Tool

Please re-run Farbar Recovery Scan Tool to give me a fresh look at your system.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Make sure that Addition option is checked.
• Press Scan button and wait.
• The tool will produce two logfiles on your desktop: FRST.txt and Addition.txt.

Please include their content into your next reply.