How to remove All-Radio 4.27 Portable Trojan (Virus Removal Guide)

If the All-Radio 4.27 Portable program got installed on your PC without your knowledge, then your device might be infected with rootkits, Trojans and other types of malware.

All-Radio 4.27 Portable is in fact a legitimate online video and radio program, however cyber criminals are bundling this program with cracked programs to hide the installation of different types of malware.

All-Radio 4.27 Portable Trojan is commonly bundled with other free programs that you download off of the Internet. Unfortunately, some free downloads do not adequately disclose that other software will also be installed and you may find that you have installed All-Radio 4.27 Portable without your knowledge.

When All-Radio 4.27 Portable is installed, it waits until an Internet connection becomes available to connect to a remote server or website in order to download additional malicious programs onto the infected computer. This Trojan may install adware, Trojans, rootkits and other types of malware.

A typical behavior for the malicious programs that are installed along side All-Radio 4.27 Portable is one or all of the following:

• Download and install other malware.
• Use your computer for click fraud.
• The infected PC is used for mining thus using more than 80% of the resources
• Record your keystrokes and the sites you visit.
• Send information about your PC, including usernames and browsing history, to a remote malicious hacker.
• Give a remote malicious hacker access to your PC.
• Advertising banners are injected with the web pages that you are visiting.
• Random web page text is turned into hyperlinks.

How to remove All-Radio 4.27 Portable CPU Miner  (Virus Removal Guide)

• STEP 1: Use Malwarebytes to remove the All-Radio 4.27 Portable Trojan
• STEP 2: Use HitmanPro to scan for malware and unwanted programs
• STEP 3: Scan your PC with Zemana AntiMalware Free to remove rootkits
• STEP 4: Double-check for malicious programs with Emsisoft Emergency Kit

STEP 1: Use Malwarebytes to remove the All-Radio 4.27 Portable Trojan

Malwarebytes is one of the most popular and most used anti-malware software for Windows, and for good reasons. It is able to destroy many types of malware that other software tends to miss, without costing you absolutely nothing. When it comes to cleaning up an infected device, Malwarebytes has always been free and we recommend it as an essential tool in the fight against malware.

The first time you install Malwarebytes, you’re given a free 14-day trial of the premium edition, which includes preventative tools like real-time scanning and specific protection from ransomware. After two weeks, it automatically reverts to the basic free version that will detect and clean up malware infections only when you run a scan. It is important to note that Malwarebytes will run alongside antivirus software without conflicts.

1. Download Malwarebytes.

   You can download Malwarebytes by clicking the link below.

   MALWAREBYTES DOWNLOAD LINK
   (The above link will open a new page from where you can download Malwarebytes)

2. Double-click on the Malwarebytes setup file.

   When Malwarebytes has finished downloading, double-click on the mb3-setup-consumer-x.x.x.xxxx.exe file to install Malwarebytes on your PC. In most cases, downloaded files are saved to the Downloads folder.

   
   You may be presented with an User Account Control pop-up asking if you want to allow Malwarebytes to make changes to your device. If this happens, you should click “Yes” to continue with the installation.
   

3. Follow the on-screen prompts to install Malwarebytes.

   When the Malwarebytes installation begins, you will see the Malwarebytes Setup Wizard which will guide you through the installation process. To install Malwarebytes on your PC, click on the “Agree and Install” button.
   
   

4. Click on “Scan Now”.

   Once installed, Malwarebytes will automatically start and update the antivirus database. To perform a system scan, click on the “Scan Now” button.
   

5. Wait for the Malwarebytes scan to complete.

   Malwarebytes will now start scanning your computer for adware and other malicious programs. This process can take a few minutes, so we suggest you do something else and periodically check on the status of the scan to see when it is finished.
   

6. Click on “Quarantine Selected”.

   When the scan has completed, you will be presented with a screen showing the malware infections that Malwarebytes has detected. To remove the malicious programs that Malwarebytes has found, click on the “Quarantine Selected” button.
   

7. Reboot your computer.

   Malwarebytes will now remove all the malicious files and registry keys that it has found. To complete the malware removal process, Malwarebytes may ask you to restart your computer.
   
   When the malware removal process is complete, you can close Malwarebytes and continue with the rest of the instructions.

STEP 2: Use HitmanPro to scan for malware and unwanted programs

HitmanPro is a second opinion scanner that takes a unique cloud-based approach to malware scanning. HitmanPro scans the behavior of active files and also files in locations where malware normally resides for suspicious activity. If it finds a suspicious file that’s not already known, HitmanPro sends it to their clouds to be scanned by two of the best antivirus engines today, which are Bitdefender and Kaspersky.

Although HitmanPro is shareware and costs $24.95 for 1 year on 1 PC, there is actually no limit in scanning. The limitation only kicks in when there is a need to remove or quarantine detected malware by HitmanPro on your system and by then, you can activate the one time 30 day trial to enable the clean up.

1. Download HitmanPro.

   You can download HitmanPro by clicking the link below.

   HITMANPRO DOWNLOAD LINK
   (The above link will open a new web page from where you can download HitmanPro)

2. Install HitmanPro.

   When HitmanPro has finished downloading, double-click on “hitmanpro.exe” (for 32-bit versions of Windows) or “hitmanpro_x64.exe” (for 64-bit versions of Windows) to install this program on your PC. In most cases, downloaded files are saved to the Downloads folder.
   
   You may be presented with an User Account Control pop-up asking if you want to allow HitmanPro to make changes to your device. If this happens, you should click “Yes” to continue with the installation.

3. Follow the on-screen prompts.

   When HitmanPro starts you will be presented with the start screen as shown below. Click on the “Next” button to perform a system scan.
   

4. Wait for the HitmanPro scan to complete.

   HitmanPro will now begin to scan your computer for malicious programs. This process will take a few minutes.
   

5. Click on “Next”.

   When HitmanPro has finished the scan, it will display a list of all the malware that the program has found. Click on the “Next” button to remove the malicious programs.
   

6. Click on “Activate free license”.

   Click on the “Activate free license” button to begin the free 30 days trial and remove all the malicious files from your PC.
   
   When the process is complete, you can close HitmanPro and continue with the rest of the instructions.

STEP 3: Scan your PC with Zemana AntiMalware Free to remove rootkits

Zemana AntiMalware is a free popular on-demand antivirus scanner which can detect and remove malware that even the most well-known anti-virus and anti-malware applications fail to find.

1. Download Zemana AntiMalware.

   You can download Zemana AntiMalware Free by clicking the link below.

   ZEMANA ANTIMALWARE DOWNLOAD LINK
   (The above link will open a new web page from where you can download Zemana AntiMalware)

2. Double-click on the setup file.

   Double-click on the file named “Zemana.AntiMalware.Setup.exe” to start the installation of Zemana AntiMalware. In most cases, downloaded files are saved to the Downloads folder.
   
   You may be presented with a User Account Control dialog asking you if you want to run this file. If this happens, you should click “Yes” to continue with the installation.
   

3. Install Zemana AntiMalware Free.

   Click on the “Next” button to install Zemana AntiMalware on your PC. Follow the on-screen prompts to complete the install process.
   

   When you reach the “Select Additional Tasks” screen, you need to opt-out the “Enable Real Time Protection” option, then click on the “Next” button.
   

4. Click on “Scan”.

   When Zemana AntiMalware will start, click on the “Scan” button to perform a system scan.
   

5. Wait for the Zemana AntiMalware scan to complete.

   Zemana AntiMalware will now scan your PC for malicious files. This process can take a few minutes.
   

6. Click on “Next”.

   When Zemana AntiMalware has finished it will display a list of all the malware that the program found. Click on the “Next” button to remove the malicious files from your computer.
   

7. Restart your PC.

   When the malware removal process is complete, Zemana AntiMalware may need to restart your computer. Click on the “Reebot” button to restart your PC.
   

STEP 4: Double-check for malicious programs with Emsisoft Emergency Kit

Emsisoft Emergency Kit is a free and powerful on-demand scanner that can be used to remove viruses, trojans, spyware, adware, worms, and other malicious programs.

1. Download Emsisoft Emergency Kit.

   You can download Emsisoft Emergency Kit by clicking the link below.

   EMSISOFT EMERGENCY KIT DOWNLOAD LINK
   (The above link will open a new web page from where you can download Emsisoft Emergency Kit)

2. Install Emsisoft Emergency Kit.

   Double-click on the EmsisoftEmergencyKit setup file to start the installation process, then click on the “Install” button.
   

3. Start Emsisoft Emergency Kit.

   On your desktop the “EEK” folder (C:\EEK) should now be open. To start Emsisoft, click on the “Start Emsisoft Emergency Kit” file to open this program.
   

   You may be presented with a User Account Control dialog asking you if you want to run this file. If this happens, you should click “Yes” to continue with the installation.
   

4. Click on “Malware Scan”.

   Emsisoft Emergency Kit will start and it will ask you for permission to update itself. Once the update process is complete, click on the “Scan” tab, and perform a “Malware Scan“.

   
   Emsisoft Emergency Kit will now scan your PC for malicious files. This process can take a few minutes.
   

5. Click on “Quarantine selected”.

   When the Emsisoft scan has finished, you will be presented with a screen reporting which malicious files were detected on your computer. To remove the malicious programs, click on the “Quarantine selected“.
   

   When the malware removal process is complete, Emsisoft Emergency Kit may need to restart your computer. Click on the “Reebot” button to restart your PC.

Your computer should now be free of the All-Radio 4.27 Portable malware. If you are still experiencing problems while trying to remove the All-Radio 4.27 Portable Trojan, you can ask for help in our Malware Removal Assistance for Windows forum.