Solved EnhancedNT.dll error

[Ali.heartless]

Hi Everyone and tanx in advance for any HELP,

I have downloaded comodo internet security in my HP Laptop operating W7 (SP1) 64bit. Afetr the first scan when i restarted my laptop n have got a dll start up error.

Windows Start up Problem
c:\users\myname\appdata\roaming\babsolution\shared\enhancedNT.dll
The specified module cannot be found.

So please if any one can take me out of this !!!

Cheers
Ali

 

[TwinHeadedEagle]

Hi,

Before we begin, I want you to have this in mind:

• At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
• Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
• Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
• Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.
  
• All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
• If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
• I visit forum several times at day, making sure to respond to everyone's topic as fast as possible. But bear in mind that I have private life like everyone and I cannot be here 24/7. So please be patient with me. Also, some infections require less, and some more time to be removed completely, so bear this in mind and be patient.
• Please stay with me until the end of all steps and procedures and I declare your system clean. Just because there is a lack of symptoms does not indicate a clean machine. If you solved your problem yourself, set aside two minutes to let me know.
  
• Please attach all report using
  
  button below. Doing this, you make it easier for me to analyze and fix your problem.

Scan with ZOEK

Please download ZOEK by Smeenk and save it to your desktop (preferred version is the *.exe one)
Temporary disable your AntiVirus and AntiSpyware protection - instructions here.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
• Wait patiently until the main console will appear, it may take a minute or two.
• In the main box please paste in the following script:
  

  createsrpoint;
  gpt.ini;z 
  C:\Windows\System32\GroupPolicy;v
  C:\Windows\SysWOW64\GroupPolicy;v
  process;
  services-list;
  systemspecs;
  startupall;
  skipfix-iedefaults;
  firefoxlook;
  chromelook;
  filesrcm;
  installedprogs;

• Make sure that Scan All Users option is checked.
• Push Run Script and wait patiently. The scan may take a couple of minutes.
• When the scan completes, a zoek-results logfile should open in notepad.
• If a reboot is needed, it will be opened after it. You may also find it at your main drive (usually C:\ drive)

Post its content into your next reply.

 

[Ali.heartless]

Tnx for the response i read above all and will go on with ur instructions. but i need to know that i use my machine in safe mode b-coz normale mode is not working. So is it ok ?

Ali

 

[TwinHeadedEagle]

No, that is not ok

In that case, use this tool:


Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatibale with your system. If you are not sure which version applies to your system download both of them and try to run them.
Only one of them will run on your system, that will be the right version.

• Double-click to run it. When the tool opens click Yes to disclaimer.
• Press Scan button.
• It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
• The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.

 

[Ali.heartless]

I did as you have said.
You can have the text files from the attachment

Cheers
Ali

 

[TwinHeadedEagle]

Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

​

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Press the Fix button just once and wait.
• If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
• When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.




Try to boot normally now?

 

[Ali.heartless]

Hi
i did everything as u have mentioned but still have da same problem

i did both in safe mode and normal mode but nagative.

Ali

 

[TwinHeadedEagle]

Run FRST again, check Addition.txt, press Scan and attach both reports.

 

[Ali.heartless]

ok have it plz i did it again as u have said


Ali

 

[TwinHeadedEagle]

Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

​

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Press the Fix button just once and wait.
• If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
• When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.

 

[Ali.heartless]

Hi

Still facing da same problem. again nagative result

 

[TwinHeadedEagle]

Run one more fix:

Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

​

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Press the Fix button just once and wait.
• If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
• When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.

 

[Ali.heartless]

many tanx i don't get dll error now but after 2 minutes my laptop stops working. it still hang's. what am i gonna do with that.any solution !!

Ali

 

[TwinHeadedEagle]

Can you tell me what is the manufactures and model of your laptop?

 

[Ali.heartless]

yes here are the details.

manufactures: Hewlett-Packard
module: HP pavilion dv6 notebook PC

please any solution that i can run in safe mode

Tnx for the help

 

[TwinHeadedEagle]

Please download Hwoinfo from here

http://www.fosshub.com/HWiNFO.html

Click on Download HWiNFO HWiNFO64 Portable, and then extract it. Run HWiNFO64.exe, and click Run
If you get update message, ignore it.
In main windows, click Report, Create --> Text logfile.
Click Browse, and save it to your Desktop. Attach that report.

 

[Ali.heartless]

i am really confused what to do! in safe mode it doesn't run and in normal one my laptop stucks.
it is hang now not working any more

any other way plz

Tnx

 

[TwinHeadedEagle]

Run FRST again, check Addition.txt, press Scan and attach both reports.

 

[Ali.heartless]

here are the mentioned reports

 

[TwinHeadedEagle]

Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

​

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Press the Fix button just once and wait.
• If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
• When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.