Troubleshoot Epson L210: my printer makes prints but is blank sheet

[Daniel Hidalgo]

Briefly explain your current issue(s)

The printer itself is not a message of problem with missing heads or ink without print commands as if nothing happened

Steps taken to resolve, but have been unsuccessful

And I was checked that the cartridges are loaded and also reloaded driver but nothing happens

Hello everyone
This time I have the problem above is noteworthy that the printer has the four months that the purchase.
If not in this case you could do something or if the last option to take the printer to the manufacturer for warranty purposes

 

[vivid]

It's usually because of the cartridge. Inside the cartridge there is a sponge that dries.

 

[Cats-4_Owners-2]

In our home, if more than 1 week passes between printing, we often struggle with our Epson Stylus NX230 which is a desk jet printer.
Some remedies you might try:

1. Carefully remove the small inkwell (using gloves are a good idea) and cover the hole where it feeds ink into the printer.
2. Shake the ink contents being sure to keep the opening covered so as not to experience an unwanted shower in ink!

• Another approach after the actions above is to use the "clean heads" option which (to the best of my memory) can be found in and around the ink monitor window sections.

Good luck, @Daniel Hidalgo. I hope this plus @vivid's previous observation helps you get printing.

Footnote: We have already decided, next time we'll be getting a laser printer!
Update: If the 'L' stands for laser, cartridges can also be (carefully) shaken.

 

[jamescv7]

Have you check on the printer configuration on what's the estimated ink level? Because if its totally low then you need to purchase a new cartridge or refill it.

When did you purchase and times use the cartridge ink? Because it should be use regularly to avoid inks to dry up.

Actually I recommend to buy 'Continuous Ink System' which will save you more from the long run and does not make the ink dry.

 

[Daniel Hidalgo]

Now I'm using the continuous ink system supplied by the manufacturer so it still makes me weird
thanks guys

 

[Rolo]

I rarely print and that's why I junked ink jets a long time ago and just got a laser (Samsung CLX-3175FN), reasonable price, toner is cheaper and lasts a long time and output is perfectly consistent despite mostly sitting there with a dust cover on it.

Even without problems, ink jets are more expensive per page than laser.

 

[Aleeyen]

Make 4 boxes in any of your favourite drawing program and color them with Cyan, Magenta, yellow and black. Then put it to print, it will show you which color is creating problem. If none of the color is printing then it could be something with the printer.
But first try the head cleaning option, inkjet printers have problem with heads drying up. So, first try head cleaning (if 1 time doesn't do it try 2-3 times), most of the time it does the job. As this is a CIS printer try to find out if the inktanks are full or not, even very little amount of ink in the tanks can cause problems. If these aren't the problems then uninstall the printer driver and reinstall it. Don't touch anything inside the printer as it may make the warranty void. So, if all the above fail then , take it to the service center.