Hostage Virus survived Kasperkey - please help

Fiery

Level 1
Jan 11, 2011
2,007
Hi and welcome to MalwareTips! :)

I'm Fiery and I would gladly assist you in removing the malware on your computer.

PLEASE NOTE: The first 3 posts of ALL new members require approval by mods/admins. Please be patient if you don't see your post immediately after submitting it.

Before we start:
  • Note that the removal process is not immediate. Depending on the severity of your infection, it could take a long time.
  • Malware removal can be dangerous. I cannot guarantee the safety of your system as malware can be unpredictable. It is possible that we might encounter situations where the only recourse is to re-format and re-install your operating system. Therefore, I would advise you to backup all your important files before we start.
  • Please be patient and stay with me until I give you the green lights and inform you that your PC is clean.
  • Some tools may be flagged by your antivirus as harmful. Rest assure that ALL the tools we use are safe, the detections are false positives.
  • The absence of symptoms does not mean your PC is fully disinfected.
  • If you are unclear about the instructions, please stop and ask. Following the steps in the order that I post them in is vital.
  • Lastly, if you have requested help on other sites, that will delay and hinder the removal process. Please only stick to one site.

<hr>
Please print these instruction out so that you know what you are doing
  • Download OTLPENet.exe to your desktop
  • Download Farbar Recovery Scan Tool and save it to a flash drive.
  • Ensure that you have a blank CD in the drive
  • Double click OTLPENet.exe and this will then open imgburn to burn the file to CD
  • Reboot your system using the boot CD you just created.
    Note : If you do not know how to set your computer to boot from CD follow the steps here
  • Wait for the CD to detect your hardware and load the operating system
  • Your system should now display a Reatogo desktop
    Note : as you are running from CD it is not exactly speedy
  • Insert the USB with FRST
  • Locate the flash drive with FRST and double click
  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
 

Fiery

Level 1
Jan 11, 2011
2,007
Hi,

Your PC is heavily infected. I advise you to contact your bank to look out for suspicious transactions and change your online banking information and other passwords in a clean PC.

On your clean PC, download the following file by right-clicking it and select save as

[attachment=5414]

and save it onto your flash drive.

Then, boot to system recovery, plug in your flash drive, open FRST and click fix. Post the generated log.

Afterwards, please run a new scan with FRST so I can make sure most of the bad files are removed before you boot normally again and run more scans.
 

Attachments

  • fixlist.txt
    5.9 KB · Views: 95

prpsymbol

New Member
Thread author
Aug 24, 2013
9
Here is the log...

Fiery said:
Hi,

Your PC is heavily infected. I advise you to contact your bank to look out for suspicious transactions and change your online banking information and other passwords in a clean PC.

On your clean PC, download the following file by right-clicking it and select save as



and save it onto your flash drive.

Then, boot to system recovery, plug in your flash drive, open FRST and click fix. Post the generated log.

Afterwards, please run a new scan with FRST so I can make sure most of the bad files are removed before you boot normally again and run more scans.
 

Attachments

  • Fixlog.txt
    11 KB · Views: 103

prpsymbol

New Member
Thread author
Aug 24, 2013
9
Just do you know, I am traveling this week and won't be able to do anything on this problem until next weekend, but thanks for your help so far!

-Paul

prpsymbol said:
New scan...

Fiery said:
Please go back into FRST and press the scan button so I can see a new log of the system.
 

Fiery

Level 1
Jan 11, 2011
2,007
Ok, thanks for letting me know. When you are back,

On your clean PC, download the following file by right-clicking it and select save as

[attachment=5437]

and save it onto your flash drive.

Then, boot to system recovery, plug in your flash drive, open FRST and click fix. Post the generated log.

Then attempt to boot normally. If successful,

Download TDSSkiller from here
  • Double-Click on TDSSKiller.exe to run the application
  • When TDSSkiller opens, click change parameters , check the box next to Loaded modules . A reboot will be required.
  • After reboot, TDSSKiller will run again. Click Change parameters again and make sure everything is checked.
    clip.jpg
  • click Start scan .
  • If a suspicious object is detected, the default action will be Skip, click on Continue. (If it saids TDL4/TDSS file system, select delete)
  • If malicious objects are found, ensure Cure (default) is selected, then click Continue and Reboot now to finish the cleaning process.

Post the log after (usually C:\ folder in the form of TDSSKiller.[Version]_[Date]_[Time]_log.txt

Download Malwarebytes Anti-Rootkit from here to your Desktop
  • Unzip the contents to a folder on your Desktop.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Make sure there is a check next to Create Restore Point and click the Cleanup button to remove any threats. Reboot if prompted to do so.
  • After the reboot, perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If there are threats, click Cleanup once more and reboot.
  • When done, please post the two logs in the MBAR folder(mbar-log.txt and system-log.txt)
 

Attachments

  • fixlist.txt
    58 bytes · Views: 79

prpsymbol

New Member
Thread author
Aug 24, 2013
9
Ok, ran both scans, logs attached, but MBAR finds two items, but cannot seem to be able to get rid of them. I tried running it two more times, but each time it finds the same two items.

Fiery said:
Ok, thanks for letting me know. When you are back,

On your clean PC, download the following file by right-clicking it and select save as



and save it onto your flash drive.

Then, boot to system recovery, plug in your flash drive, open FRST and click fix. Post the generated log.

Then attempt to boot normally. If successful,

Download TDSSkiller from here
  • Double-Click on TDSSKiller.exe to run the application
  • When TDSSkiller opens, click change parameters , check the box next to Loaded modules . A reboot will be required.
  • After reboot, TDSSKiller will run again. Click Change parameters again and make sure everything is checked.
    clip.jpg
  • click Start scan .
  • If a suspicious object is detected, the default action will be Skip, click on Continue. (If it saids TDL4/TDSS file system, select delete)
  • If malicious objects are found, ensure Cure (default) is selected, then click Continue and Reboot now to finish the cleaning process.

Post the log after (usually C:\ folder in the form of TDSSKiller.[Version]_[Date]_[Time]_log.txt

Download Malwarebytes Anti-Rootkit from here to your Desktop
  • Unzip the contents to a folder on your Desktop.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Make sure there is a check next to Create Restore Point and click the Cleanup button to remove any threats. Reboot if prompted to do so.
  • After the reboot, perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If there are threats, click Cleanup once more and reboot.
  • When done, please post the two logs in the MBAR folder(mbar-log.txt and system-log.txt)
 

Attachments

  • Fixlog.txt
    454 bytes · Views: 75
  • mbar-log-2013-09-02 (12-23-01).txt
    2.5 KB · Views: 86
  • mbar-log-2013-09-02 (12-42-00).txt
    2.3 KB · Views: 111
  • system-log-2013-09-02 [12-23-01].txt
    5.7 KB · Views: 108
  • system-log-2013-09-02 [12-42-00].txt
    6.8 KB · Views: 148
  • TDSSKiller.2.8.16.0_02.09.2013_12.08.34_log.txt
    4 KB · Views: 73
  • TDSSKiller.2.8.16.0_02.09.2013_12.11.06_log.txt
    258.3 KB · Views: 113
  • TDSSKiller.2.8.16.0_02.09.2013_12.15.35_log.txt
    4.1 KB · Views: 72

Fiery

Level 1
Jan 11, 2011
2,007
Please download ComboFix from one of these locations:

<a title="External link" href="http://download.bleepingcomputer.com/sUBs/ComboFix.exe" rel="external"><>Link 1</></a>
<a title="External link" href="http://www.infospyware.net/antimalware/combofix/" rel="external"><>Link 2</></a>

<>* IMPORTANT !!! Save ComboFix to your Desktop as ComboFix.exe</>
<ul>
<li>Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools
See <a title="External link" href="http://www.bleepingcomputer.com/forums/topic114351.html" rel="external">HERE</a> for help</li>
<li>Double click on Combo-Fix & follow the prompts.</li>
<li>As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's ly recommended to have this pre-installed on your machine before doing any malware removal.  It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.</li>
<li>Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.</li>
</ul>
**Please note: (This applies to Windows XP systems only) If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.

<img src="http://img.photobucket.com/albums/v706/ried7/RcAuto1.gif" alt="Posted Image" />
Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:

<img src="http://img.photobucket.com/albums/v706/ried7/whatnext.png" alt="Posted Image" />
Click on <>Yes</>, to continue scanning for malware.

When finished, ComboFix will produce a log.

<>Note:</>
1. Do not mouseclick combofix's window while it's running. That may cause it to stall!
2. Remember to re-enable your anti-virus and anti-spyware before reconnecting to the Internet.
 
Last edited by a moderator:

prpsymbol

New Member
Thread author
Aug 24, 2013
9
Ok, ran combo fix, log attached. I wasn't watching it, so I did not see any results or messages other than the log file - did it work?

I am running mbar again, will post it's log when it's done.

Fiery said:
Please download ComboFix from one of these locations:

<a title="External link" href="http://download.bleepingcomputer.com/sUBs/ComboFix.exe" rel="external"><>Link 1</></a>
<a title="External link" href="http://www.infospyware.net/antimalware/combofix/" rel="external"><>Link 2</></a>

<>* IMPORTANT !!! Save ComboFix to your Desktop as ComboFix.exe</>
<ul>
<li>Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools
See <a title="External link" href="http://www.bleepingcomputer.com/forums/topic114351.html" rel="external">HERE</a> for help</li>
<li>Double click on Combo-Fix & follow the prompts.</li>
<li>As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's ly recommended to have this pre-installed on your machine before doing any malware removal.  It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.</li>
<li>Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.</li>
</ul>
**Please note: (This applies to Windows XP systems only) If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.

<img src="http://img.photobucket.com/albums/v706/ried7/RcAuto1.gif" alt="Posted Image" />
Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:

<img src="http://img.photobucket.com/albums/v706/ried7/whatnext.png" alt="Posted Image" />
Click on <>Yes</>, to continue scanning for malware.

When finished, ComboFix will produce a log.

<>Note:</>
1. Do not mouseclick combofix's window while it's running. That may cause it to stall!
2. Remember to re-enable your anti-virus and anti-spyware before reconnecting to the Internet.

 

Attachments

  • ComboFix.txt
    9.1 KB · Views: 73
Last edited by a moderator:

prpsymbol

New Member
Thread author
Aug 24, 2013
9
Here is the MBAR log - looks like it's clean. Are we done?


prpsymbol said:
Ok, ran combo fix, log attached. I wasn't watching it, so I did not see any results or messages other than the log file - did it work?

I am running mbar again, will post it's log when it's done.

Fiery said:
Please download ComboFix from one of these locations:

<a title="External link" href="http://download.bleepingcomputer.com/sUBs/ComboFix.exe" rel="external"><>Link 1</></a>
<a title="External link" href="http://www.infospyware.net/antimalware/combofix/" rel="external"><>Link 2</></a>

<>* IMPORTANT !!! Save ComboFix to your Desktop as ComboFix.exe</>
<ul>
<li>Disable your AntiVirus and AntiSpyware applications, usually via a right click on the System Tray icon. They may otherwise interfere with our tools
See <a title="External link" href="http://www.bleepingcomputer.com/forums/topic114351.html" rel="external">HERE</a> for help</li>
<li>Double click on Combo-Fix & follow the prompts.</li>
<li>As part of it's process, ComboFix will check to see if the Microsoft Windows Recovery Console is installed. With malware infections being as they are today, it's ly recommended to have this pre-installed on your machine before doing any malware removal.  It will allow you to boot up into a special recovery/repair mode that will allow us to more easily help you should your computer have a problem after an attempted removal of malware.</li>
<li>Follow the prompts to allow ComboFix to download and install the Microsoft Windows Recovery Console, and when prompted, agree to the End-User License Agreement to install the Microsoft Windows Recovery Console.</li>
</ul>
**Please note: (This applies to Windows XP systems only) If the Microsoft Windows Recovery Console is already installed, ComboFix will continue it's malware removal procedures.

<img src="http://img.photobucket.com/albums/v706/ried7/RcAuto1.gif" alt="Posted Image" />
Once the Microsoft Windows Recovery Console is installed using ComboFix, you should see the following message:

<img src="http://img.photobucket.com/albums/v706/ried7/whatnext.png" alt="Posted Image" />
Click on <>Yes</>, to continue scanning for malware.

When finished, ComboFix will produce a log.

<>Note:</>
1. Do not mouseclick combofix's window while it's running. That may cause it to stall!
2. Remember to re-enable your anti-virus and anti-spyware before reconnecting to the Internet.


 

Attachments

  • mbar-log-2013-09-03 (09-58-56).txt
    2 KB · Views: 64
Last edited by a moderator:

Fiery

Level 1
Jan 11, 2011
2,007
Almost done.

Please download Malwarebytes' Anti-Malware from here to your desktop.
  • Double-click mbam-setup.exe and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to
    • Update Malwarebytes' Anti-Malware
    • and Launch Malwarebytes' Anti-Malware
  • then click Finish.
  • If an update is found, it will download and install the latest version.
  • When it prompts you to try their 30-day trail, click decline
  • Once the program has loaded, select Perform quick scan, then click Scan.
  • When the scan is complete, click OK, then Show Results to view the results.
  • Be sure that everything is Checked (ticked) except items in the C:\System Volume Information folder and click on Remove Selected.
  • When completed, a log will open in Notepad. please copy and paste the log into your next reply
    • If you accidently close it, the log file is saved here and will be named like this:
    • C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\mbam-log-date (time).txt

Run Eset NOD32 Online AntiVirus here

Note: You will need to use Internet Explorer for this scan.
Vista / 7 users: You will need to to right-click on the Internet Explorer icon and select Run as Administrator
  • Tick the box next to YES, I accept the Terms of Use.
  • Click Start
  • When asked, allow the activex control to install
  • Disable your current antivirus software. You can usually do this with its Notfication Tray icon near the clock.
  • Make sure that the option "Remove found threats" is Un-checked, and the following Advance Settings are Checked
    • Scan unwanted applications
    • Scan for potentially unsafe applications
    • Enable Anti-Stealth Technology
  • Click Scan
  • Wait for the scan to finish
  • When the scan is done, if it shows a screen that says "Threats found!", then click "List of found threats", and then click "Export to text file..."
  • Save that text file on your desktop. Copy and paste the contents of that log in your next reply to this topic.
  • The log can also be found in logfile located at C:\Program Files\ESET\Eset Online Scanner\log.txt
 

prpsymbol

New Member
Thread author
Aug 24, 2013
9
Malwarebytes mbam did not find anything.

ESET found one threat.


Fiery said:
Almost done.

Please download Malwarebytes' Anti-Malware from here to your desktop.
  • Double-click mbam-setup.exe and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to
    • Update Malwarebytes' Anti-Malware
    • and Launch Malwarebytes' Anti-Malware
  • then click Finish.
  • If an update is found, it will download and install the latest version.
  • When it prompts you to try their 30-day trail, click decline
  • Once the program has loaded, select Perform quick scan, then click Scan.
  • When the scan is complete, click OK, then Show Results to view the results.
  • Be sure that everything is Checked (ticked) except items in the C:\System Volume Information folder and click on Remove Selected.
  • When completed, a log will open in Notepad. please copy and paste the log into your next reply
    • If you accidently close it, the log file is saved here and will be named like this:
    • C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\mbam-log-date (time).txt

Run Eset NOD32 Online AntiVirus here

Note: You will need to use Internet Explorer for this scan.
Vista / 7 users: You will need to to right-click on the Internet Explorer icon and select Run as Administrator
  • Tick the box next to YES, I accept the Terms of Use.
  • Click Start
  • When asked, allow the activex control to install
  • Disable your current antivirus software. You can usually do this with its Notfication Tray icon near the clock.
  • Make sure that the option "Remove found threats" is Un-checked, and the following Advance Settings are Checked
    • Scan unwanted applications
    • Scan for potentially unsafe applications
    • Enable Anti-Stealth Technology
  • Click Scan
  • Wait for the scan to finish
  • When the scan is done, if it shows a screen that says "Threats found!", then click "List of found threats", and then click "Export to text file..."
  • Save that text file on your desktop. Copy and paste the contents of that log in your next reply to this topic.
  • The log can also be found in logfile located at C:\Program Files\ESET\Eset Online Scanner\log.txt
 

Attachments

  • mbam-log-2013-09-08 (12-22-26).txt
    1.9 KB · Views: 58
  • Eset.txt
    135 bytes · Views: 72

Fiery

Level 1
Jan 11, 2011
2,007
The threat found by ESET is in your system restore points. You will have to purge your restore points so the malware won't return. I have included that information below.

If you are no longer experiencing any other issues, your PC is now clean!

Download OTL by Old Timer from here and save it to your Desktop.
  • Double-click on OTL and click on the Cleanup button at the top.
  • You will be asked to reboot the machine to finish the Cleanup process. Choose Yes
  • This will remove itself and other tools we may have used.




Now that your PC is clean, I recommend you to create a new System Restore point then purge the old ones after.

For XP
How to create a Restore Point in XP
Delete all restore points except the most recent one



Keeping your programs (especially Adobe and Java products) updated is essential. Outdated programs make your PC more vulnerable to future malware threats. To help you:
  • Download and install Update Checker. It will notify you if any of your programs require an update.
  • Microsoft releases patches for Windows and Office products regularly to patch up Windows and Office product bugs and vulnerabilities.
  • Please ensure you update your system regularly and have automatic updates on. You can learn how to turn Automatic Updates on here


I also recommend you to install an antivirus program. Here are some suggestions:

In addition to your antivirus, you need additional protection such as a firewall and behavioural blocker. However, adding one of these programs may slow down performance. It is for you to decide the trade off between more security and a faster PC.


Other steps that you may want to do to further protect your system/files:
  • Sandboxie - "Quarantines" your browser so anything that you do in it will be isolated from your system.
  • Backup important files regulary to an external hard-drive or USB

Here are only a few suggestions that will improve your system security. Should you wish to allow us to make full recommendations and set your PC up with maximum security, please start a thread here. Our community of PC enthusiasts and experts will give you feedback and help you secure your system from future malware infections.

Should you want to try a product but don't know how it performs, here is a list of current reviews to help you decide.


Internet Explorer may be the most popular browser but it's definitely not the most secure browser. Consider using other browsers with addition add-ons to safeguard your system while browsing the internet.

Firefox is a more secure, faster browser than Internet Explorer. Firefox contains less vulnerabilities, reducing the risk of drive-by downloads. In addition, you can add the following add-ons to increase security.
  • KeyScramber - Encrypts your keystrokes to protect you against keyloggers that steals personal & banking information
  • AdBlock - Disable/blocks advertisements on websites so you won't accidentally click on a malicious ad.
  • NoScript - Disables Flash & Java contents to avoid exploits or drive-by attacks
  • Web of Trust - Shows the website rating by other users and blocks dangerous and poor-rated sites

Google Chrome is another good browser that is faster and more secure than Internet Explorer by having a sandbox feature. Additionally, you can add the following add-on to Chrome to heighten security.


Lastly, it is important to perform system maintenance on a regular basis. Here are a few tools and on-demand scanners that you should keep & use every 1-2 weeks to keep your system healthy.

Other than that, stay safe out there! If you have any other questions or concerns, feel free to ask :)

My virus removal help is always free. Should you wish to show your appreciation via a donation, it will be much appreciated.
 

About us

  • MalwareTips is a community-driven platform providing the latest information and resources on malware and cyber threats. Our team of experienced professionals and passionate volunteers work to keep the internet safe and secure. We provide accurate, up-to-date information and strive to build a strong and supportive community dedicated to cybersecurity.

User Menu

Follow us

Follow us on Facebook or Twitter to know first about the latest cybersecurity incidents and malware threats.

Top