Reply to thread

Message

<blockquote data-quote="imsoadude" data-source="post: 136703" data-attributes="member: 31"><s>Another question i bumped the core clock only up to 1000MHz and on AIDA64 says its sitting at 300MHz on idle and under stress test it says it only bumps up to 600MHz? is this normal or should it be at 1000MHz under load (also happens on default settings)</s><s></s><s>found another post similar on another website said it could be the power control so ill increase that to +10% or +20% to see if it helps</s>Therefore the FurMark would be incorrect since it didnt have enough power and core clock was jumping around.Worked now its at 1000MHz with +10% in AIDA64 now going to do a whole system stressGot MSI After Burner set up to combat the high temps with fan speed seems like i got it to level off at about 78-79 Celsius (GPU Diode) and 86 for VRM1 and 82 for VRM2 only thing im concerned about is that to keep them at those temps the fan speed at the moment is 89% could that raise problems or hurt the GPU? and stress test is worst case scenario right so i might be able to play a game and have it not use 99% usage all the time and have lower temps meaning lower fan speed?And i reran FurMark and it was getting up to 86 Celsius on the Diode with fans at 96%, is there a way i can keep this cool&#039;er or is it something im doing wrong?Edit: after an hour it is stable no crashes nothing 99% GPU usage whole time.</blockquote>

[QUOTE="imsoadude, post: 136703, member: 31"] [s]Another question i bumped the core clock only up to 1000MHz and on AIDA64 says its sitting at 300MHz on idle and under stress test it says it only bumps up to 600MHz? is this normal or should it be at 1000MHz under load (also happens on default settings) found another post similar on another website said it could be the power control so ill increase that to +10% or +20% to see if it helps[/s] Therefore the FurMark would be incorrect since it didnt have enough power and core clock was jumping around. Worked now its at 1000MHz with +10% in AIDA64 now going to do a whole system stress Got MSI After Burner set up to combat the high temps with fan speed seems like i got it to level off at about 78-79 Celsius (GPU Diode) and 86 for VRM1 and 82 for VRM2 only thing im concerned about is that to keep them at those temps the fan speed at the moment is 89% could that raise problems or hurt the GPU? and stress test is worst case scenario right so i might be able to play a game and have it not use 99% usage all the time and have lower temps meaning lower fan speed? And i reran FurMark and it was getting up to 86 Celsius on the Diode with fans at 96%, is there a way i can keep this cool'er or is it something im doing wrong? Edit: after an hour it is stable no crashes nothing 99% GPU usage whole time. [/QUOTE]

Verification