Different kinds of ads will pop up randomly and will open new tabs on their own. I'm pretty sure this is what's causing my browser to slow down. I have tried everything I could think of but the only problem I solved was the V9 Portal being my homepage, which was solved when I restarted firefox (firefox is the browser I use most often, I am experiencing the same problems in all other browsers as well).
Pop-up Ads
- Thread starter frey
- Start date
- Mar 8, 2013
- 22,627
Download attached fixlist.txt on the same location as FRST (otherwise the fix won't work)
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to the operating system
Open FRST, and click Fix. Attach me that report after it is finished.
NOTICE: This script was written specifically for this user, for use on that particular machine. Running this on another machine may cause damage to the operating system
Open FRST, and click Fix. Attach me that report after it is finished.
- Mar 8, 2013
- 22,627
Let's make one final check:
Please download Malwarebytes AntiRootkit (MBAR) and save it to your desktop.
For full instructions how MBAR works, read this article
> Doubleclick on the MBAR file
and allow it to run.
• Click OK on the next screen, to allow the package to extract the contents of the file to its own folder named mbar.
• mbar.exe will launch automatically. On some systems, this may take a few extra seconds. Please be patient and wait for the program to open.
• After reading the Introduction, click Next if you agree.
• On the Update Database screen, click on the Update button. Once you see 'Success: Database was successfully updated' click on Next
• Under Scan Targets ensure all boxes are ticked. Then click the Scan button.
Notice: with some infections, you may see two messages boxes:
- 'Could not load protection driver'. Click 'OK'.
- 'Could not load DDA driver'. Click 'Yes' to this message, to allow the driver to load after a restart. Allow the computer to restart. Continue with the rest of these instructions.
>> If malware is not detected, click the Exit button to close the program and post the mbar-log-year-month-day.txt and system-log.txt reports.
>> If an infection/s are found ensure Create Restore Point are ticked. Then select the "Cleanup! button to remove threats.
• The clean up procedure will be scheduled for process, pop-up will be shown.
Select the Yes button and the system should re-boot to complete the cleaning process.
>> Notice: only if an RootKit are detected, ensure to run fixdamage.exe tool located in mbar folder, \Plugins\fixdamage.exe
- Run fixdamage.exe, at the black window to continue type Y (alias for Yes). Wait few seconds for execution ...
- When you see "press any key to exit" fix is completed, press any key to close the window. Reboot the system.
> The following reports will be created in mbar folder:
1. mbar-log-year-month-day (hour-minute-second).txt
2. system-log.txt
Please post both logs in your next reply.
Please download Malwarebytes AntiRootkit (MBAR) and save it to your desktop.
For full instructions how MBAR works, read this article
> Doubleclick on the MBAR file
• Click OK on the next screen, to allow the package to extract the contents of the file to its own folder named mbar.
• mbar.exe will launch automatically. On some systems, this may take a few extra seconds. Please be patient and wait for the program to open.
• After reading the Introduction, click Next if you agree.
• On the Update Database screen, click on the Update button. Once you see 'Success: Database was successfully updated' click on Next
• Under Scan Targets ensure all boxes are ticked. Then click the Scan button.
Notice: with some infections, you may see two messages boxes:
- 'Could not load protection driver'. Click 'OK'.
- 'Could not load DDA driver'. Click 'Yes' to this message, to allow the driver to load after a restart. Allow the computer to restart. Continue with the rest of these instructions.
>> If malware is not detected, click the Exit button to close the program and post the mbar-log-year-month-day.txt and system-log.txt reports.
>> If an infection/s are found ensure Create Restore Point are ticked. Then select the "Cleanup! button to remove threats.
• The clean up procedure will be scheduled for process, pop-up will be shown.
Select the Yes button and the system should re-boot to complete the cleaning process.
>> Notice: only if an RootKit are detected, ensure to run fixdamage.exe tool located in mbar folder, \Plugins\fixdamage.exe
- Run fixdamage.exe, at the black window to continue type Y (alias for Yes). Wait few seconds for execution ...
- When you see "press any key to exit" fix is completed, press any key to close the window. Reboot the system.
> The following reports will be created in mbar folder:
1. mbar-log-year-month-day (hour-minute-second).txt
2. system-log.txt
Please post both logs in your next reply.
- Mar 8, 2013
- 22,627
Yeap, you're clean now 
• The following will implement some post-cleanup procedures:
=> Please download DelFix by Xplode to your Desktop.
Run the tool and check the following boxes below;
Remove disinfection tools
Create registry backup
Purge System Restore
Click Run button and wait a few seconds for the programme completes his work.
At this point all the tools we used here should be gone. Tool will create an report for you (C:\DelFix.txt)
The tool will also record healthy state of registry and make a backup using ERUNT program in %windir%\ERUNT\DelFix
Tool deletes old system restore points and create a fresh system restore point after cleaning.
• The following will implement some post-cleanup procedures:
=> Please download DelFix by Xplode to your Desktop.
Run the tool and check the following boxes below;
Click Run button and wait a few seconds for the programme completes his work.
At this point all the tools we used here should be gone. Tool will create an report for you (C:\DelFix.txt)
The tool will also record healthy state of registry and make a backup using ERUNT program in %windir%\ERUNT\DelFix
Tool deletes old system restore points and create a fresh system restore point after cleaning.
Similar threads
