Status
Not open for further replies.

belzedar

New Member
I have the same problem with my cmd prompt window flasing. I got a screen capture of it and it has to do with my Blackberry Link. I ran the Farbar scan. I tried deleting the program with no luck at first. But now it is deleted and still the window flashes.
 

Attachments

  • FRST.txt
    49.5 KB · Views: 75
  • Addition.txt
    23.9 KB · Views: 66

TwinHeadedEagle

Level 41
Verified
Hello,



They call me TwinHeadedEagle around here, and I'll be working with you.



Before we start please read and note the following:
  • At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
  • Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
  • Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
  • Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.
  • All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
  • If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
  • I visit forum several times at day, making sure to respond to everyone's topic as fast as possible. But bear in mind that I have private life like everyone and I cannot be here 24/7. So please be patient with me. Also, some infections require less, and some more time to be removed completely, so bear this in mind and be patient.
  • Please stay with me until the end of all steps and procedures and I declare your system clean. Just because there is a lack of symptoms does not indicate a clean machine. If you solved your problem yourself, set aside two minutes to let me know.
  • Please attach all report using
    button below. Doing this, you make it easier for me to analyze and fix your problem.

  • Do not ask for help for your business PC. Companies are making revenue via computers, so it is good thing to pay someone to repair it.
  • If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.




Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

  • Right-click on
    icon and select
    Run as Administrator to start the tool.
    (XP users click run after receipt of Windows Security Warning - Open File).
  • Press the Fix button just once and wait.
  • If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  • When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.




Fix with AdwCleaner

Please download AdwCleaner by Xplode and save the file to your desktop.

  • Right-click on
    icon and select
    Run as Administrator to start the tool.
  • Follow the prompts and click Scan.
  • When finished, please click Clean.
  • Upon completion, click Report. A log (AdwCleaner[S*].txt) will open.

Please include the contents of that file in your reply.




Scan with Malwarebytes' Anti-Malware

Please download Malwarebytes Anti-Malware and save it to your desktop.
  • Install the progam and select update.
  • Once updated, click the Settings tab, in the left panel choose Detctions & protection and tick Scan for rootkits.
  • Click the Scan tab, choose Threat Scan is checked and click Scan Now.
  • If threats are detected, click the Apply Actions button. You will now be prompted to reboot. Click Yes.
  • Upon completion of the scan (or after the reboot), click the History tab.
  • Click Application Logs and double-click the Scan Log.
  • At the bottom click Export and choose Text file.
Save the file to your desktop and include its content in your next reply.
 

Attachments

  • fixlist.txt
    7.2 KB · Views: 78

belzedar

New Member
Thank you for helping me. I did what you said in the order in which you told me. Here are the log reports.
 

Attachments

  • AdwCleaner[S0].txt.txt
    3.9 KB · Views: 60
  • Fixlog.txt
    8.1 KB · Views: 142
  • Malwarebytes Anti-Malware log.txt
    1.1 KB · Views: 48

belzedar

New Member
The cmd prompt window still flashes but with a new text. I managed to get another screen shot and the line is.....
There was an error deleting C:\ProgramData\Research In Motion\Tunne1 Manager\rim
tun-2014-11-10-21-43-11.3428.bugz
Unknown arg '-Embedding'

I'm not sure if the last character in the word "Tunne1" is the number 1 or the letter L (but lower case)
 

TwinHeadedEagle

Level 41
Verified
Scan with Farbar Recovery Scan Tool

Please re-run Farbar Recovery Scan Tool to give me a fresh look at your system.
  • Right-click on
    icon and select
    Run as Administrator to start the tool.
    (XP users click run after receipt of Windows Security Warning - Open File).
  • Make sure that Addition option is checked.
  • Press Scan button and wait.
  • The tool will produce two logfiles on your desktop: FRST.txt and Addition.txt.
Please include their content into your next reply.
 

TwinHeadedEagle

Level 41
Verified
Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

  • Right-click on
    icon and select
    Run as Administrator to start the tool.
    (XP users click run after receipt of Windows Security Warning - Open File).
  • Press the Fix button just once and wait.
  • If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  • When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.
 

Attachments

  • fixlist.txt
    1.3 KB · Views: 62

belzedar

New Member
Yes! The cmd prompt window doesn't seem to be flashing anymore! Thank you very much! What was the problem? Is it safe for me to reinstall the Blackberry Link program?
 

TwinHeadedEagle

Level 41
Verified
Problem was in one BlackBerry program. You can reinstall it now.



Glad I could help. We will delete all used tools and I'll give you some tips to harden your security and learn how to protect yourself :)


Recommended reading:
MUST READ - security tips:

MUST READ - general maintenance:


The Importance of Software Updating:

In order to stay protected it is
very important that you regularly update all of your software. Cybercriminals depend on the apathy of users around software updates to keep their malicious endeavor running.

Operating systems, such as Windows, and applications, such as Adobe Reader or JAVA, are used by tens of millions of computers and devices around the world, making them a huge target for cybercriminals. Downloading updates and installing them can sometimes be tedious, but the advantages you get from the updates are certainly worth it.




Recommended additional software:
TFC - to clean unneeded temporary files.
Malwarebytes' Anti-Malware - to scan your system from time to time in search for malware.
Malwarebytes' Anti-Exploit - to prevent plenty of mostly exploited vulnerabilities.
McShield - to prevent infections spread by removable media.
Unchecky - to prevent from installing additional foistware, implemented in legitimate installations.
FiheHippo.com Update Checker - to keep your programs up-to-date.
Adblock - to surf the web without annoying ads!



Post-cleanup procedures:


Download DelFix by Xplode and save it to your desktop.
  • Run the tool by right click on the
    icon and Run as administrator option.
  • Make sure that these ones are checked:
    • Remove disinfection tools
    • Purge system restore
    • Reset system settings
  • Push Run and wait until the tool completes his work.
  • All tools we used should be gone. Tool will create an report for you (C:\DelFix.txt)
The tool will also record healthy state of registry and make a backup using ERUNT program in %windir%\ERUNT\DelFix
Tool deletes old system restore points and create a fresh system restore point after cleaning.



My help is free for everybody.
If you're happy with the help provided and/or wish to buy me a beer for the assistance you received, then you can consider a donation:
Thank you!​




Stay safe,
TwinHeadedEagle :)
 
Status
Not open for further replies.
Top