Status
Not open for further replies.
A

Alkajak

Known issue in this convenience rollup
Symptoms

After you install the rollup, virtualized applications in Microsoft Application Virtualization (App-V) versions 4.5, 4.6, and 5.0 may have problems loading. When these problems occur, you may receive an error message that resembles the following:
Launching MyApp 100%

Note In this error message, MyApp represents the name of the App-V application.

Depending on the scenario, the virtualized app may freeze after it starts, or the app may not start at all.

Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 How to back up and restore the registry in Windows
Resolution

To fix this known issue, configure the TermSrvReadyEvent registry entry on the computer on which the Microsoft Application Virtualization Client is installed.

For Microsoft Application Virtualization 5.0
  • Registry Key: HKEY_LOCAL_MACHINE\Software\Microsoft\AppV\Subsystem\ObjExclusions
    Value name: 93 (or any unique value)
    Type: REG_SZ
    Data: TermSrvReadyEvent

    Example
    For example, type the following command at an elevated command prompt to add the entry to a system that is running Application Virtualization 5.0:
    reg add HKEY_LOCAL_MACHINE\Software\Microsoft\AppV\Subsystem\ObjExclusions /v 93 /t REG_SZ /d TermSrvReadyEvent
For Microsoft Application Virtualization 4.6
  • For all supported x86-based systems

    Registry Key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SoftGrid\4.5\SystemGuard\ObjExclusions
    Value name: 95 (or any unique value)
    Type: REG_SZ
    Data: TermSrvReadyEvent

    Example
    For example, type the following command at an elevated command prompt to add the entry to an x86-based system that is running Application Virtualization 4.6:
    reg add HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\SoftGrid\4.5\SystemGuard\ObjExclusions /v 95 /t REG_SZ /d TermSrvReadyEvent
  • For all supported x64-based systems

    Registry Key:HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\SoftGrid\4.5\SystemGuard\ObjExclusions
    Value name: 95 (or any unique value)
    Type: REG_SZ
    Data: TermSrvReadyEvent

    Example
    For example, type the following command at an elevated command prompt to add the entry to an x64-based system that is running Application Virtualization 4.6:
    reg add HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\SoftGrid\4.5\SystemGuard\ObjExclusions /v 95 /t REG_SZ /d TermSrvReadyEvent
More information
We intentionally did not include any specific post-Service Pack 1 updates in convenience rollup 3125574 for which the following conditions are true:
  • They don’t have broad applicability.
  • They introduce behavior changes.
  • They require additional user actions, such as making registry settings.
You may download and install such fixes manually after you determine whether they apply to your deployment scenarios. Specifically, the following fixes are not included in this convenience rollup:

2620264 You cannot start any RemoteApp applications through a Windows Server 2008-based or later Terminal Server or RD Gateway
2646060 An update that selectively disables the Core Parking feature in Windows 7 or in Windows Server 2008 R2 is available
2647954 The PIN dialog box does not appear or you are presented with all the certificates in the store when you try to access a WebDAV server in Windows 7 or in Windows Server 2008 R2
2663685 Changes that are not replicated to a downstream server are lost on the upstream server after an automatic recovery process occurs in a DFS Replication environment in Windows Server 2008 R2
2695321 IPsec session takes 5 to 6 minutes to connect to a storage controller on a computer that is running Windows Vista, Windows Server 2008, Windows 7, or Windows Server 2008 R2
2727994 You cannot open or save Office 2010 documents on a WebDAV file server on a computer that is running Windows 7 or Windows Server 2008 R2
2728738 You experience a long logon time when you try to log on to a Windows 7-based or a Windows Server 2008 R2-based client computer that uses roaming profiles
2750841 An IPv6 readiness update is available for Windows 7 and for Windows Server 2008 R2
2752259 An update that improves the performance of the Printbrm.exe command-line tool in Windows 7 or in Windows Server 2008 R2 is available
2891144 Application does not draw polylines correctly when you run it through an RD Session in Windows Server 2008 R2 SP1
2898851 Description of the security update for the .NET Framework 3.5.1 on Windows 7 Service Pack 1 and Windows Server 2008 R2 Service Pack 1: May 13, 2014
2907020 "Location is not available" error when you access a mapped network drive after Windows standby or resume
2918833 Third-party IMEs give users unprotected access to your Windows 7-based or Windows Server 2008 R2-based system
2923766 Black screen when you plug in a monitor on a computer or open a lid of a laptop that is running in Windows
2925489 You cannot establish an IPsec connection with certain third-party devices in Windows
2990184 A FIPS-compliant recovery password cannot be saved to AD DS for BitLocker in Windows 7 or Windows Server 2008 R2
2781512 - WinRM operations to Hyper-V fail on a Windows 7 SP1-based or Windows Server 2008 R2 SP1-based computer that has Windows Management Framework 3.0 installed
2823180 - Update is available for Windows Management Framework 3.0 in Windows 7 SP1, Windows Server 2008 R2 SP1, or Windows Server 2008 SP2
2802886 - You cannot register an SPN from a Windows 7, Windows 8, Windows Server 2008 R2 or Windows Server 2012-based client computer in a disjoint namespace
2842230 - "Out of memory" error on a computer that has a customized MaxMemoryPerShellMB quota set and has WMF 3.0 installed
2887064 - The Start-Process cmdlet ignores the "-Wait" parameter when the cmdlet is started remotely on a Windows 7 SP1, Windows Server 2008 R2 SP1, Windows Vista SP2, or Windows Server 2008 SP2 computer that has Windows Management Framework 3.0 installed
2889748 - High memory usage by the Svchost.exe process after you install Windows Management Framework 3.0 on a Windows-based computer
2830615 - $MyInvocation.MyCommand object is set to null when you run the script by using PowerShell 3.0 in Windows 8 or in Windows Server 2012

This convenience rollup also does not include any of the servicing updates for Internet Explorer. If you require the servicing updates for Internet Explorer, download and install the latest Security update for Internet Explorer.

How to get this convenience rollup

Microsoft Update Catalog
To get the package for this update, go to the Microsoft Update Catalog website.
Update detail information

Prerequisites
To apply this update, you must install Service Pack 1 for Windows 7 or Windows Server 2008 R2 (KB976932) andApril 2015 servicing stack update for Windows 7 and Windows Server 2008 R2 (KB3020369).

You also need at least 4 GB of free disk space to install this update. After a brand-new installation, the disk usage will increase by between 1 GB and 2 GB, depending on processor type (x86 vs. x64) and edition (Enterprise or ThinPC).
 
Status
Not open for further replies.
Top