How to remove XP Antispyware Pro 2013 virus

Jack

Administrator
Thread author
Verified
Staff Member
Well-known
Jan 24, 2011
9,378
XP Antispyware Pro 2013 is a rogue security software which will report that malware has been detected on your computer in an attempt to scare you into buying this malicious software.
In reality, none of the reported issues are real, and are only used to scare you into buying XP Antispyware Pro 2013 and stealing your personal financial information.

As part of its self-defense mechanism,XP Antispyware Pro 2013 has installed a rootkit on your computer,which will disable the Windows Task Manager and will block you from running any program that could lead to its removal.

XP Antispyware Pro 2013 is a scam and you should ignore any alerts that this malicious software might generate.
Under no circumstance should you buy this rogue security software as this could lead to identity theft,and if you have, you should contact your credit card company and dispute the charge stating that the program is a scam and a computer virus.
Removal instructions for XP Antispyware Pro 2013 virus
This is a self-help guide, use at your own risk.
If you experience problems completing this guide, or the problem persists after following the instructions below or would like to have one of our staff members guide you through the process, please start a new thread in our Malware Removal Assistance forum.
STEP 1 : Start your computer in Safe Mode with Networking
  1. Remove all floppy disks, CDs, and DVDs from your computer, and then restart your computer.
  2. Press and hold the F8 key as your computer restarts.Please keep in mind that you need to press the F8 key before the Windows start-up logo appears.
    Note: With some computers, if you press and hold a key as the computer is booting you will get a stuck key message. If this occurs, instead of pressing and holding the "F8 key", tap the "F8 key" continuously until you get the Advanced Boot Options screen.
    safemode.jpg
  3. On the Advanced Boot Options screen, use the arrow keys to highlight Safe Mode with Networking , and then press ENTER.

STEP 2: Run RKill to terminate known malware processes associated with XP Antispyware Pro 2013.
RKill is a program that will attempt to terminate all malicious processes associated with XP Antispyware Pro 2013,so that we will be able to perform the next step without being interrupted by this malicious software.
Because this utility will only stop XP Antispyware Pro 2013 running process, and does not delete any files, after running it you should not reboot your computer as any malware processes that are configured to start automatically will just be started again.
  1. While your computer is in <em>Safe Mode with Networking</em> ,please download the latest official version of RKill.Please note that we will use a renamed version of RKILL so that XP Antispyware Pro 2013 won’t block this utility from running.
    RKILL DOWNLOAD LINK (This link will automatically download RKILL renamed as iExplore.exe)
  2. Double-click on the iExplore.exe icon in order to automatically attempt to stop any processes associated with XP Antispyware Pro 2013.
    rkill1.png

  3. RKill will now start working in the background, please be patient while the program looks for various malware programs and tries to terminate them.
    rkill2.png

  4. When Rkill has completed its task, it will generate a log. You can then proceed with the rest of the guide.
    rkill3.png
WARNING: Do not reboot your computer after running RKill as the malware process will start again , preventing you from properly performing the next step.

STEP 3: Remove XP Antispyware Pro 2013 malicious files with Malwarebytes Anti-Malware FREE
  1. Download the latest official version of Malwarebytes Anti-Malware FREE.
    MALWAREBYTES ANTI-MALWARE DOWNLOAD LINK (This link will open a download page in a new window from where you can download Malwarebytes Anti-Malware Free)
  2. Start the Malwarebytes' Anti-Malware installation process by double clicking on mbam-setup file.
    malwarebytes-setup.png

  3. When the installation begins, keep following the prompts in order to continue with the setup process. Do not make any changes to default settings and when the program has finished installing, make sure you leave both the Update Malwarebytes' Anti-Malware and Launch Malwarebytes' Anti-Malware checked. Then click on the Finish button. If Malwarebytes' prompts you to reboot, please do not do so.
    update-malwarebytes.png

  4. Malwarebytes Anti-Malware will now start and you'll be prompted to start a trial period , please select 'Decline' as we just want to use the on-demand scanner.
    mbam3.PNG

  5. On the Scanner tab,select Perform full scan and then click on the Scanbutton to start scanning your computer.
    start-scan-malwarebytes.png

  6. Malwarebytes' Anti-Malware will now start scanning your computer for XP Antispyware Pro 2013 malicious files as shown below.
    scan-malwarebytes.png

  7. When the scan is finished a message box will appear, click OK to continue
    results-malwarebytes.png
  8. You will now be presented with a screen showing you the malware infections that Malwarebytes' Anti-Malware has detected.Please note that the infections found may be different than what is shown in the image.Make sure that everything is Checked (ticked) and click on the Remove Selected button.
    detection-malwarebytes.png
  9. Malwarebytes' Anti-Malware will now start removing the malicious files.After completing this task it will display a message stating that it needs to reboot,please allow this request and then let your PC boot in Normal mode.

STEP 4: Remove XP Antispyware Pro 2013 rootkit with HitmanPro
  1. This step can be performed in Normal Mode ,so please download the latest official version of HitmanPro.
    HITMANPRO DOWNLOAD LINK (This link will open a download page in a new window from where you can download HitmanPro)
  2. Double click on the previously downloaded file to start the HitmanPro installation.
    hpro1.png

    IF you are experiencing problems while trying to starting HitmanPro, you can use the "<em>Force Breach</em>" mode.To start this program in Force Breach mode, hold down the left CTRL-key when you start HitmanPro and all non-essential processes are terminated, including the malware process.
  3. Click on Next to install HitmanPro on your system.
    hpro2.png

  4. The setup screen is displayed, from which you can decide whether you wish to install HitmanPro on your machine or just perform a one-time scan, select a option then click on Next to start a system scan.
    hpro3.png

  5. HitmanPro will start scanning your system for malicious files. Depending on the the size of your hard drive, and the performance of your computer, this step will take several minutes.
    hpro4.png

  6. Once the scan is complete,a screen displaying all the malicious files that the program found will be shown as seen in the image below.After reviewing each malicious object click Next.
    hpro5.png

  7. Click Activate free license to start the free 30 days trial and remove the malicious files.
    hpro6.png

  8. HitmanPro will now start removing the infected objects, and in some instances, may suggest a reboot in order to completely remove the malware from your system. In this scenario, always confirm the reboot action to be on the safe side.
If you are still experiencing problems while trying to remove XP Antispyware Pro 2013 from your machine, please start a new thread in our Malware Removal Assistance forum.
 
Last edited:

About us

  • MalwareTips is a community-driven platform providing the latest information and resources on malware and cyber threats. Our team of experienced professionals and passionate volunteers work to keep the internet safe and secure. We provide accurate, up-to-date information and strive to build a strong and supportive community dedicated to cybersecurity.

User Menu

Follow us

Follow us on Facebook or Twitter to know first about the latest cybersecurity incidents and malware threats.

Top