justice dept virus

Status
Not open for further replies.

TwinHeadedEagle

Level 41
Verified
Mar 8, 2013
22,627
Hello,



They call me TwinHeadedEagle around here, and I'll be working with you.



Before we start please read and note the following:
  • At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
  • Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
  • Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
  • Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.
  • All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
  • If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
  • I visit forum several times at day, making sure to respond to everyone's topic as fast as possible. But bear in mind that I have private life like everyone and I cannot be here 24/7. So please be patient with me. Also, some infections require less, and some more time to be removed completely, so bear this in mind and be patient.
  • Please stay with me until the end of all steps and procedures and I declare your system clean. Just because there is a lack of symptoms does not indicate a clean machine. If you solved your problem yourself, set aside two minutes to let me know.
  • Please attach all report using
    fjqb1h.png
    button below. Doing this, you make it easier for me to analyze and fix your problem.

  • If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.




Please print these instruction out so that you know what you are doing
  • Download OTLPENet.exe to your desktop
  • Download Farbar Recovery Scan Tool and save it to a flash drive.
  • Ensure that you have a blank CD in the drive
  • Double click OTLPENet.exe and this will then open imgburn to burn the file to CD
  • Reboot your system using the boot CD you just created.
    Note : If you do not know how to set your computer to boot from CD follow the steps here
  • Wait for the CD to detect your hardware and load the operating system
  • Your system should now display a Reatogo desktop
    Note : as you are running from CD it is not exactly speedy
  • Insert the USB with FRST
  • Locate the flash drive with FRST and double click
  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
 

mak36

New Member
Thread author
Aug 14, 2014
9
Hello,



They call me TwinHeadedEagle around here, and I'll be working with you.



Before we start please read and note the following:
  • At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
  • Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
  • Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
  • Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.
  • All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
  • If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
  • I visit forum several times at day, making sure to respond to everyone's topic as fast as possible. But bear in mind that I have private life like everyone and I cannot be here 24/7. So please be patient with me. Also, some infections require less, and some more time to be removed completely, so bear this in mind and be patient.
  • Please stay with me until the end of all steps and procedures and I declare your system clean. Just because there is a lack of symptoms does not indicate a clean machine. If you solved your problem yourself, set aside two minutes to let me know.
  • Please attach all report using
    fjqb1h.png
    button below. Doing this, you make it easier for me to analyze and fix your problem.

  • If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.




Please print these instruction out so that you know what you are doing
  • Download OTLPENet.exe to your desktop
  • Download Farbar Recovery Scan Tool and save it to a flash drive.
  • Ensure that you have a blank CD in the drive
  • Double click OTLPENet.exe and this will then open imgburn to burni the file to CD
  • Reboot your system using the boot CD you just created.
    Note : If you do not know how to set your computer to boot from CD follow the steps here
  • Wait for the CD to detect your hardware and load the operating system
  • Your system should now display a Reatogo desktop
    Note : as you are running from CD it is not exactly speedy
  • Insert the USB with FRST
  • Locate the flash drive with FRST and double click
  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) on the flash drive. Please copy and paste it to your reply.
Can't get past the screen
 

mak36

New Member
Thread author
Aug 14, 2014
9
Once I log hit enter I see my desktop for about 5 seconds then it takes over and I can't do anything. I get a white screen and then the justice department screen comes on.
 

mak36

New Member
Thread author
Aug 14, 2014
9
Ok,I looked into that and they had a warning that it could harm my non infected computer
I was going to download the first two steps on it but it wasn't contour instructions.
 

TwinHeadedEagle

Level 41
Verified
Mar 8, 2013
22,627
Due to the lack of feedback this topic is closed to prevent others from posting here. If you need this topic reopened, please send a Private Message to me or any one of the moderating team members. Please include a link to this thread with your request. This applies only to the originator of this thread.

Other members who need assistance please start your own topic in a new thread. Thanks!
 
Status
Not open for further replies.

About us

  • MalwareTips is a community-driven platform providing the latest information and resources on malware and cyber threats. Our team of experienced professionals and passionate volunteers work to keep the internet safe and secure. We provide accurate, up-to-date information and strive to build a strong and supportive community dedicated to cybersecurity.

User Menu

Follow us

Follow us on Facebook or Twitter to know first about the latest cybersecurity incidents and malware threats.

Top