LessTabs Uninstall results in white screen

elephant7

New Member
Thread author
Jul 31, 2013
7
Tried to use the Anvi Rescue Disk, but could not get it to connect to the wifi.

Can not figure out how to run the OTL scan when i can not get into the laptop. Did manage to download it to this computer...

The Homeland Security virus may also be playing a part in this problem. It did not show up on the last boot, but is probably lurking somewhere.
FBI Cybercrime showed up when started in safe mode, locked down system.

Cannot always access Advanced startup menu, and when it does appear it will not allow entry in F10 & F11, & sometimes blocks F9 (the boot from USB option menu)
 

kuttus

Level 2
Verified
Oct 5, 2012
2,697
Hi and welcome to the malwaretips.com forums!

I'm Kuttus and I am going to try to assist you with your problem. Please take note of the below:
  • I will start working on your malware issues, this may or may not, solve other issues you have with your machine.
  • The fixes are specific to your problem and should only be used for this issue on this machine!
  • The process is not instant. Please continue to review my answers until I tell you your machine is clear. Absence of symptoms does not mean that everything is clear.
  • If you don't know, stop and ask! Don't keep going on.
  • Please reply to this thread. Do not start a new topic.
  • Refrain from running self fixes as this will hinder the malware removal process.
  • It may prove beneficial if you print of the following instructions or save them to notepad as I post them.
Your security programs may give warnings for some of the tools I will ask you to use. Be assured, any links I give are safe.


Before we start:
Please be aware that removing malware is a potentially hazardous undertaking. I will take care not to knowingly suggest courses of action that might damage your computer. However it is impossible for me to foresee all interactions that may happen between the software on your computer and those we'll use to clear you of infection, and I cannot guarantee the safety of your system. It is possible that we might encounter situations where the only recourse is to re-format and re-install your operating system, or to necessitate you taking your computer to a repair shop.

Because of this, I advise you to backup any personal files and folders before you start.
<hr />

<h3>STEP 1 : Start your computer in Safe Mode with Networking</h3>
<ol><li>Remove all floppy disks, CDs, and DVDs from your computer, and then <>restart your computer</>.</li>
<li><>Press and hold the F8 key as your computer restarts</>.Please keep in mind that you need to press the F8 key <>before the Windows start-up logo appears</>.
<em>Note</em>: With some computers, if you press and hold a key as the computer is booting you will get a stuck key message. If this occurs, instead of pressing and holding the "F8 key", <>tap the "F8 key" continuously</> until you get the Advanced Boot Options screen.</li>
<li>On the Advanced Boot Options screen, use the arrow keys to <>highlight Safe Mode with Networking</> , and then <>press ENTER</>.
<img title="Safe Mode with Networking screen" src="http://malwaretips.com/images/removalguide/safemode.jpg" alt="[Image: Safemode.jpg]" width="539" height="292" border="0" /></li>
</ol>
<hr />

STEP 2: Run a scan with OTL by OldTimer
<ol><li>Download the OTL utility using the below link :
<><a title="External link" href="http://oldtimer.geekstogo.com/OTL.exe" rel="nofollow external">OTL DOWNLOAD LINK</a> <em>(This link will automatically download OTL on your computer)</em></></li>
<li>Double click on the icon to run it. Make sure all other windows are closed and to let it run uninterrupted.
<img src="http://malwaretips.com/blogs/wp-content/uploads/2012/07/OTL-logo.png" alt="" title="OTL-logo" width="106" height="118" class="alignnone size-full wp-image-3946" /></li>
<li>When the window appears, <>underneath Output</> at the top change it to <>Minimal Output</>.</li>
<li>Check the boxes beside <>LOP Check</> and <>Purity Check</>.</li>
<li>Click the<> Run Scan</> button.
<img src="http://malwaretips.com/blogs/wp-content/uploads/2012/07/OTL.png" alt="" title="OTL" width="658" height="584" class="alignnone size-full wp-image-3945" /></li>
<li>When the scan completes, it will open two notepad windows. <>OTL.Txt</> and <>Extras.Txt</>. These are saved in the same location as OTL.
<>Please post this 2 logs in your first reply.</>.</li></ol>

Settings You need to Select in OTL
  1. Click the Scan All Users checkbox.
  2. Change Standard Registry to All.
  3. Check the boxes beside LOP Check and Purity Check.
<em>Note: If OTL.exe will not run, it may be blocked by malware. Try these alternate versions: <a title="External link" href="http://www.itxassociates.com/OT-Tools/OTL.scr" rel="nofollow external">OTL.scr</a>, or <a title="External link" href="http://oldtimer.geekstogo.com/OTL.com" rel="nofollow external">OTL.com</a>.</em>

<hr />
 
Last edited by a moderator:

elephant7

New Member
Thread author
Jul 31, 2013
7
Tried serveral times to start in safe mode w/ networking. The commands start to scroll and it gets to "Loaded: \windows\system32\DRIVERS\CLASSPNP.SYS" and stops, and hangs, and does nothing.
Once it made it past and there was the 'white' screen, that i can't get past...
Put this program on a stick and tried to use the advanced menu options to boot from stick, however (it must know what i'm trying to do) it will not open the menu screen so i can select boot from USB.
groan
 

kuttus

Level 2
Verified
Oct 5, 2012
2,697
Try this one....

Can you please try to run a scan with Farbar Recovery Scan Tool. You will need a USB (Flash) pendrive.

For x32 (x86) bit systems download Farbar Recovery Scan Tooland save it to a flash drive.
For x64 bit systems download Farbar Recovery Scan Tool x64 and save it to a flash drive.

Plug the flashdrive into the infected PC.

Enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:
  • Restart the computer.
  • As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
  • Click on Repair your computer menu item.
  • Select US as the keyboard language settings, and then click Next.
  • Select the operating system you want to repair, and then click Next.
  • Select your user account and click Next.
On the System Recovery Options menu you will get the following options:
Startup Repair
System Restore
Windows Complete PC Restore
Windows Memory Diagnostic Tool
Command Prompt

  • Select Command Prompt
  • In the command window type in notepad and press Enter.
  • The notepad opens. Under File menu select Open.
  • Select "Computer" and find your flash drive letter and close the notepad.
  • In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter
    Note: Replace letter e with the drive letter of your flash drive.
  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) in the flash drive. Please copy and paste it to your reply.
 

elephant7

New Member
Thread author
Jul 31, 2013
7
Ok, your instructions are impeccable. And I did all you said; even went back and double checked on this computer to make sure, the program was on the stick, it was. Upon the second time into the notepad, i actually opened the 'g' drive, and the Farber program does not show up on the stick when in the infected laptop; just the 'SanDiskSecureAccess' file folder showes up. (that is the name of the usb stick).
When the command g:\frst.exe & enter are pressed the message:
The subsystem needed to support the image type is not present. appears.

Was there a step i missed in just copying and pasting the Farber program on/into the usb stick?

Thank You
 

elephant7

New Member
Thread author
Jul 31, 2013
7
Not working, just keep getting that same message...
It knows and it is evil
Loaded AntiMalware program onto same stick, and when opened stick from notepad, it does not show up as being there.
 

kuttus

Level 2
Verified
Oct 5, 2012
2,697
Lets create a bootable HitmanPro Rescue Disk and run a scan:
STEP 1: Create a HitmanPro.Kickstart USB flash drive
<ol>
<li>While you are using a "clean" (non-infected) computer, <>download HitmanPro</> from the below link.
<a href="http://www.surfright.nl/en/hitmanpro/" rel="nofollow" target="_blank"> <>HITMANPRO DOWNLOAD LINK</></a> <em>(This link will open a download page in a new window from where you can download HitmanPro)</em></li>
<li>Insert your USB flash drive into your computer and then follow the instructions from the below video:
<iframe src="http://www.youtube.com/embed/aBS902Qr0oc?rel=0" frameborder="0" width="640" height="360"></iframe></li>
</ol>
STEP 2: Remove infection with HitmanPro.Kickstart
<ol>
<li>After you have create the HitmanPro.Kickstart USB flash drive, you can <>insert this USB drive into the infected machine</> and start your computer</li>
<li>Once the computer starts <>repeatedly tap the F11 key </>(on some machines its <em>F10</em> or <em>F2</em>),which should bring up the Boot Menu, from there you can select to boot from your USB.
Next,you'll need to <>perform a system scan with HitmanPro</> as see in the below video:
<iframe src="http://www.youtube.com/embed/lUNHidkYsDQ?rel=0" frameborder="0" width="640" height="360"></iframe></li>
</ol>

<hr />
 
Last edited by a moderator:

elephant7

New Member
Thread author
Jul 31, 2013
7
Did as requested. When entering the system from the usb stick containing HitmanPro the 'Startup Repair' started running, 'Repairing disk errors.' Claims it might take over an hour to complete. Tried to cancel it, but, it won't let me.

Will let it run, unless you advise against it.
 

elephant7

New Member
Thread author
Jul 31, 2013
7
Sooo, finally got Hitmanpro to run, found the errors... however the virus is blocking my access to wifi on the laptop that is infected, when boot from usb is initiated. Even tried plugging directly into ethernet cable with no result. Upon free activation, it just gives the error message 'Firewall software on your computer might be blocking. Convinced its not the 'firewall' its the virus, cause had this problem with the first removal program that wanted to use its cloud to run with.
 

About us

  • MalwareTips is a community-driven platform providing the latest information and resources on malware and cyber threats. Our team of experienced professionals and passionate volunteers work to keep the internet safe and secure. We provide accurate, up-to-date information and strive to build a strong and supportive community dedicated to cybersecurity.

User Menu

Follow us

Follow us on Facebook or Twitter to know first about the latest cybersecurity incidents and malware threats.

Top