Operating System
Windows 10

nishadrox

Level 2
I have an 8GB SD card. I scanned it with ESET SS and Malwarebytes and removed all the detected infections. Still when I remove it and plug it again the scanners detect the malware again! I can neither format nor scan the drive for errors. Please help!!!
 
  • Like
Reactions: Spawn

TwinHeadedEagle

Removal Expert
Verified
Staff member
Hi,

Before we begin, I want you to have this in mind:
  • At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
  • Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process.
  • Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
  • Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.
  • I visit forum several times at day, making sure to respond to eveyone's topic as fast as possible. But bear in mind that I have private life like everyone and I cannot be here 24/7. So please be patient with me.
  • Please stay with me until the end of all steps and procedures and I declare your system clean. Just because there is a lack of symptoms does not indicate a clean machine. If you solved your problem yourself, set aside two minutes to let me know.
  • Please attach all report using
    button below. Doing this, you make it easier for me to analyze and fix your problem.





Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatibale with your system. If you are not sure which version applies to your system download both of them and try to run them.
Only one of them will run on your system, that will be the right version.


  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
  • The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.
 

TwinHeadedEagle

Removal Expert
Verified
Staff member
Please download MCShield from one of the following links:

MCShield -Official download link
  • Double click on MCShield-Setup to install the application.
    Next => I Agree => Next => Install ... per installation click on Run! button.
  • Wait a few seconds to MCShield finish initial HDD scan...
  • Connect all your USB storage devices to the computer one at a time. Scanning will be done automatically.
  • When all scanning is done, you need to post a logreport that MCShield has created.
Under Logs tab (in Control Center) for AllScans.txt log section click on Save button. AllScanst.txt report shall be located on your Desktop.

=> Post here AllScanst.txt


Explanation: USB storage devices are all the USB devices that get their own partition letter at connecting to the PC,
e.g. flash drives (thumb/pen drives, USB sticks), external HDDs, MP3/MP4 players, digital cameras,
memory cards (SD cards, Sony Memory Stick, MultiMedia Cards etc.), some mobile phones, some GPS navigation devices etc.
 

nishadrox

Level 2
Still the malware and the rest of the files keep reappearing. Tried many programs and command prompt to fully wipe the card. Still not fully formatted
 

TwinHeadedEagle

Removal Expert
Verified
Staff member
You need to clean other PC in order to use it. Or to use MCShield on this PC that will clean your SD card everytime you plug it in.