UKASH (Chesire Police) help please

pauld01

New Member
Thread author
Mar 3, 2013
1
Could not post other logs asked for as I could get anything other than the Recovery command prompt to respond. Have attached the FRST. txt file.
Any help will be greatly appreciated:(
Yours pauld
 

Attachments

  • FRST.txt
    34.8 KB · Views: 196

kuttus

Level 2
Verified
Oct 5, 2012
2,697
Hi and welcome to the malwaretips.com forums!

I'm Kuttus and I am going to try to assist you with your problem. Please take note of the below:
  • I will start working on your malware issues, this may or may not, solve other issues you have with your machine.
  • The fixes are specific to your problem and should only be used for this issue on this machine!
  • The process is not instant. Please continue to review my answers until I tell you your machine is clear. Absence of symptoms does not mean that everything is clear.
  • If you don't know, stop and ask! Don't keep going on.
  • Please reply to this thread. Do not start a new topic.
  • Refrain from running self fixes as this will hinder the malware removal process.
  • It may prove beneficial if you print of the following instructions or save them to notepad as I post them.
Your security programs may give warnings for some of the tools I will ask you to use. Be assured, any links I give are safe.


Before we start:
Please be aware that removing malware is a potentially hazardous undertaking. I will take care not to knowingly suggest courses of action that might damage your computer. However it is impossible for me to foresee all interactions that may happen between the software on your computer and those we'll use to clear you of infection, and I cannot guarantee the safety of your system. It is possible that we might encounter situations where the only recourse is to re-format and re-install your operating system, or to necessitate you taking your computer to a repair shop.

Because of this, I advise you to backup any personal files and folders before you start.
<hr />

Now please download this file and save it to your Flash Drive.

[attachment=3845]

Then, boot to system recovery, plug in your flash drive, open FRST and click fix. Post the generated log. Then attempt to boot to normal mode.
 

Attachments

  • fixlist.txt
    123 bytes · Views: 104

kuttus

Level 2
Verified
Oct 5, 2012
2,697
pauld01 said:
pauld01 from malwaretips.com has sent you the following message:
------------------------------------------
Normal boot back again (you are a star), the fixlog text is below.

Fix result of Farbar Recovery Tool (FRST written by Farbar) (x64) Version: 28-02-2013
Ran by SYSTEM at 2013-03-04 00:25:10 Run:1
Running from F:\Malwarepost

==============================================

HKEY_USERS\owner\Software\Microsoft\Windows NT\CurrentVersion\Winlogon\\Shell Value deleted successfully.
C:\Users\owner\AppData\Roaming\ldr.mcb moved successfully.

==== End of Fixlog ====
------------------------------------------



That's great to hear... :) Now lets do the following scans so that we can make sure there is no other infections remaining...

STEP 1: Run a scan with Junkware Removal Tool

Please download Junkware Removal Tool to your desktop from here
  • Turn off your antivirus software now to avoid potential conflicts
  • Double-click to run the tool. For Windows Vista or 7 users, right-click the file and select Run as Administrator
  • The tool will open and start scanning your system
  • Please be patient as this can take a while to complete depending on your system's specifications
  • On completion, a log (JRT.txt) will be saved to your desktop and will automatically open
  • Post the contents of JRT.txt into your next reply




Download Malwarebytes Anti-Rootkit from here to your Desktop
  • Unzip the contents to a folder on your Desktop.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Make sure there is a check next to Create Restore Point and click the Cleanup button to remove any threats. Reboot if prompted to do so.
  • After the reboot, perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If there are threats, click Cleanup once more and reboot.
  • When done, please post the two logs in the MBAR folder(mbar-log.txt and system-log.txt)



Please download Malwarebytes' Anti-Malware to your desktop.
  • Double-click mbam-setup.exe and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to
    • Update Malwarebytes' Anti-Malware
    • and Launch Malwarebytes' Anti-Malware
  • then click Finish.
  • If an update is found, it will download and install the latest version.
  • When it prompts you to try their 30-day trail, click decline
  • Once the program has loaded, select Perform quick scan, then click Scan.
  • When the scan is complete, click OK, then Show Results to view the results.
  • Be sure that everything is Checked (ticked) except items in the C:\System Volume Information folder and click on Remove Selected.
  • When completed, a log will open in Notepad. please copy and paste the log into your next reply
    • If you accidently close it, the log file is saved here and will be named like this:
    • C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\mbam-log-date (time).txt





STEP 3: Run a HitmanPro scan
<ol>
<li><>Download the latest official version of HitmanPro</>.
<a href="http://www.surfright.nl/en/hitmanpro/" rel="nofollow" target="_blank"> <>HITMANPRO DOWNLOAD LINK</></a> <em>(This link will open a download page in a new window from where you can download HitmanPro)</em></li>
<li>Start HitmanPro by <>double clicking on the previously downloaded file.</> and then following the prompts.
<img src="http://malwaretips.com/images/removalguide/hpro4.png" alt="[Image: hitmanproscan4.png]" border="0" /></li>
<li>Once the scan is complete, a screen displaying all the malicious files that the program found will be shown as seen in the image below.After reviewing each malicious object click <>Next</> .
<img src="http://malwaretips.com/blogs/wp-content/uploads/2012/02/rsz_hpro5.png" alt="[Image: hitmanproscan5.png]" border="0" /></li>
<li>Click <>Activate free license</> to start the free 30 days trial and remove the malicious files.
<img src="http://malwaretips.com/images/removalguide/hpro6.png" alt="[Image: hitmanproscan6.png]" border="0" /></li>
<li>HitmanPro will now start removing the infected objects, and in some instances, may suggest a reboot in order to completely remove the malware from your system. In this scenario, always confirm the reboot action to be on the safe side.
</ol>
Add to your next reply, any log that HitmanPro might generate.
<hr />
 
Last edited by a moderator:

About us

  • MalwareTips is a community-driven platform providing the latest information and resources on malware and cyber threats. Our team of experienced professionals and passionate volunteers work to keep the internet safe and secure. We provide accurate, up-to-date information and strive to build a strong and supportive community dedicated to cybersecurity.

User Menu

Follow us

Follow us on Facebook or Twitter to know first about the latest cybersecurity incidents and malware threats.

Top