Solved dllhost*32.exe / com surrogate problem/ Trojan.Powelik.E?

[hhager23]

I would greatly appreciate any help you can provide in cleaning up my pc. I am by no means an expert but I can follow directions and hope to learn something from this experience.

 

[TwinHeadedEagle]

Hello,



They call me TwinHeadedEagle around here, and I'll be working with you.



Before we start please read and note the following:

• At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
• Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
• Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
• Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.
  
• All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
• If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
• I visit forum several times at day, making sure to respond to everyone's topic as fast as possible. But bear in mind that I have private life like everyone and I cannot be here 24/7. So please be patient with me. Also, some infections require less, and some more time to be removed completely, so bear this in mind and be patient.
• Please stay with me until the end of all steps and procedures and I declare your system clean. Just because there is a lack of symptoms does not indicate a clean machine. If you solved your problem yourself, set aside two minutes to let me know.
  
• Please attach all report using
  
  button below. Doing this, you make it easier for me to analyze and fix your problem.
  
• Do not ask for help for your business PC. Companies are making revenue via computers, so it is good thing to pay someone to repair it.
• If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.

Scan with TDSSKiller

Please download TDSSKiller by Kaspersky and save it to your desktop.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
• Click on Change parameters and put a checkmark beside Loaded modules. A reboot will be needed to apply the changes, allow it to do so.
• Your machine may appear very slow and unusable after that - it's normal.
• TDSSKiller will run automaticaly. Click on Change parameters and click OK.
• Click the Start Scan button and wait patiently.

If anything will be found follow this guidelines:

• If a suspicious object is detected, the default action will be Skip, click on Continue.
• If malicious objects are found, they will show in the Scan results - Select action for found objects and offer three options.
  Ensure Cure (default) is selected, then click Continue > Reboot now to finish the cleaning process.
  If Cure is not available, please choose Skip instead.
• Do not choose Delete unless instructed!

A report will be created in your root directory, (usually C:\ drive) in the form of TDSSKiller.[Version]_[Date]_[Time]_log.txt. Please include the contents of that file in your next post.

Scan with Farbar Recovery Scan Tool

Please re-run Farbar Recovery Scan Tool to give me a fresh look at your system.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Make sure that Addition option is checked.
• Press Scan button and wait.
• The tool will produce two logfiles on your desktop: FRST.txt and Addition.txt.

Please include their content into your next reply.

 

[hhager23]

farbar report attached

working on tdss now

 

[hhager23]

Here is TDSS log. Thank you very much for your help.

 

[TwinHeadedEagle]

You're missing Addition.txt report.

 

[hhager23]

sorry = here it is

 

[TwinHeadedEagle]

Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

​

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Press the Fix button just once and wait.
• If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
• When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.

 

[hhager23]

Thank you very much for your help. Attached is the fixlog.

I did get a Norton warning while typing this that powelik.E and Exploit tool kit were blocked.

Is that any reason for concern?

 

[TwinHeadedEagle]

Scan with Farbar Recovery Scan Tool

Please re-run Farbar Recovery Scan Tool to give me a fresh look at your system.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Make sure that Addition option is checked.
• Press Scan button and wait.
• The tool will produce two logfiles on your desktop: FRST.txt and Addition.txt.

Please include their content into your next reply.

 

[hhager23]

Attached are the FRST and Addition files.

 

[TwinHeadedEagle]

Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

​

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Press the Fix button just once and wait.
• If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
• When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.

 

[hhager23]

TwinHeadedEagle,

Farbar running Fixlist has been running for over 2 hours. Guidance appreciated.

And yes both Farbar and Fixlist were in the same directory.

Thanks for your help.

 

[hhager23]

After farbar ran fixlist for 5 hours showing no activity, I shut it down via task manager, restarted the computer and again ran fixlist. In less than 5 minutes the following fixlog was produced. One blocked virus notice while I typed this.

Awaiting guidance. Thanks.

 

[TwinHeadedEagle]

Okay, let's make fresh Scan:

Scan with Farbar Recovery Scan Tool

Please re-run Farbar Recovery Scan Tool to give me a fresh look at your system.

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Make sure that Addition option is checked.
• Press Scan button and wait.
• The tool will produce two logfiles on your desktop: FRST.txt and Addition.txt.

Please include their content into your next reply.

 

[hhager23]

here are fresh scans

 

[TwinHeadedEagle]

Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

​

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

• Right-click on
  
  icon and select
  
  Run as Administrator to start the tool.
  (XP users click run after receipt of Windows Security Warning - Open File).
• Press the Fix button just once and wait.
• If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
• When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.

 

[hhager23]

Farbar has been running fixlist for about 20 minutes. Should I restart or how long would you think would be appropriate? and what exactly do you mean "restart normally"? I want to be sure I do this right. Thanks.

 

[hhager23]

Norton requested a restart which I allowed. i had to pick user and computer proceeded to boot up. There was then a notice from norton about a poweliks attack and then one saying threats had been located and resolved. I haven't touched it since. What would you have me do at this point?

 

[hhager23]

I am contacting you via another computer as there still appears to be some hard drive activity on the infected machine.

 

[hhager23]

After fixlog appeared, I ran farbar and am attaching FRST and Addition files.