Netgear has announced the first quad-band WiFi 6E router, in the form of the Orbi Quad-Band Mesh WiFi 6E System AXE11000 (RBKE960). Historically, high-performing, hot-rod routers have been tri-band, meaning they have an extra WiFi 5 band to cover the higher channels and offer more throughput for 160 MHz-capable devices. In contrast, every WiFi 6E router broadcasts on the 2.4 GHz, 5 GHz, and 6 GHz frequency bands, hence they are all necessarily tri-band. Unfortunately, this means that you lose that second, higher-throughput 5 GHz band in exchange for a band that very few devices currently use. This doesn’t generally matter in any practical sense, but it’s worth acknowledging.
Where this new Orbi mesh system diverges from the norm is in adding a fourth band, which will not be used directly by users per se, but will instead be a second 5 GHz band that functions as a dedicated wireless backhaul for the system. In networking parlance, a backhaul is an exclusive data link that functions as a back channel for communication between nodes in a mesh system, preserving throughput for the band used by your devices. Why 5 GHz over 6 GHz for the backhaul? In a briefing, Netgear said it was about range: while the 6 GHz band is currently free from congestion, enabling higher practical throughput, it simply can’t be used to transmit as far as devices can on the 5 GHz band.
This new iteration of the Orbi mesh system is being pitched as a response to the increased upstream throughput needs of today’s households. Since the beginning of the pandemic, remote work, digital classrooms, and even socialization via video call have all put much more emphasis on the importance of upload speeds than ever before. Netgear’s Orbi also looks quite future-proofed, with a 10Gbps WAN port, a 2.5 Gbps LAN, and three gigabit ethernet ports on the primary gateway and an identical port layout—minus the 10 Gbps WAN port—on each satellite. That’s a nice change relative to the previous WiFi 6 version, the RBK853, which has a 2.5 Gbps WAN and four gigabit LAN ports on the gateway router and just four gigabit ports on each satellite unit. That 2.5 Gbps LAN port on each satellite means you can run a very fast wired backhaul—however, doing so will not free up that fourth wireless band for use by your network devices, as Netgear reserves it in the event you’d like to add additional satellite nodes wirelessly to make up a hybrid network.
Netgear says their Orbi system is geared toward a good IoT experience as well, offering a separate, WPA2-only IoT network that is unexposed to your home and guest networks for better security and more efficient bandwidth use, and they also claim to have solved issues with fussy IoT devices not rejoining the network after power outages or upgrading router––a pain smart home device enthusiasts know all too well. Beyond a distinct IoT network, you’ll also be able to configure a guest network, a combined 2.4 GHz and 5 GHz network for the bulk of your devices, and a 6 GHz network for your fastest devices.
The Orbi system will also use Netgear Armor, Netgear’s Bitdefender-powered network security suite, as well as its Smart Parent Controls, which look very much like a network-level version of the iOS Screen Time feature. Additionally, this new Orbi will of course use the updated WPA 3 protocol, which introduces new handshaking protocols and promises to compensate for your bad WiFi passwords by preventing devices on the network from exchanging that password during handshakes, among other important security changes.
Read more here
www.pcworld.com
Also, here
www.guru3d.com
Where this new Orbi mesh system diverges from the norm is in adding a fourth band, which will not be used directly by users per se, but will instead be a second 5 GHz band that functions as a dedicated wireless backhaul for the system. In networking parlance, a backhaul is an exclusive data link that functions as a back channel for communication between nodes in a mesh system, preserving throughput for the band used by your devices. Why 5 GHz over 6 GHz for the backhaul? In a briefing, Netgear said it was about range: while the 6 GHz band is currently free from congestion, enabling higher practical throughput, it simply can’t be used to transmit as far as devices can on the 5 GHz band.
This new iteration of the Orbi mesh system is being pitched as a response to the increased upstream throughput needs of today’s households. Since the beginning of the pandemic, remote work, digital classrooms, and even socialization via video call have all put much more emphasis on the importance of upload speeds than ever before. Netgear’s Orbi also looks quite future-proofed, with a 10Gbps WAN port, a 2.5 Gbps LAN, and three gigabit ethernet ports on the primary gateway and an identical port layout—minus the 10 Gbps WAN port—on each satellite. That’s a nice change relative to the previous WiFi 6 version, the RBK853, which has a 2.5 Gbps WAN and four gigabit LAN ports on the gateway router and just four gigabit ports on each satellite unit. That 2.5 Gbps LAN port on each satellite means you can run a very fast wired backhaul—however, doing so will not free up that fourth wireless band for use by your network devices, as Netgear reserves it in the event you’d like to add additional satellite nodes wirelessly to make up a hybrid network.
Netgear says their Orbi system is geared toward a good IoT experience as well, offering a separate, WPA2-only IoT network that is unexposed to your home and guest networks for better security and more efficient bandwidth use, and they also claim to have solved issues with fussy IoT devices not rejoining the network after power outages or upgrading router––a pain smart home device enthusiasts know all too well. Beyond a distinct IoT network, you’ll also be able to configure a guest network, a combined 2.4 GHz and 5 GHz network for the bulk of your devices, and a 6 GHz network for your fastest devices.
The Orbi system will also use Netgear Armor, Netgear’s Bitdefender-powered network security suite, as well as its Smart Parent Controls, which look very much like a network-level version of the iOS Screen Time feature. Additionally, this new Orbi will of course use the updated WPA 3 protocol, which introduces new handshaking protocols and promises to compensate for your bad WiFi passwords by preventing devices on the network from exchanging that password during handshakes, among other important security changes.
Read more here
Netgear reveals the world's first quad-band Wi-Fi 6E router
The Netgear Orbi Quad-Band Mesh WiFi 6E System AXE11000 (RBKE960) provides a dedicated 5GHz backhaul channel, leaving you with a free 5GHz band for connected devices.
www.pcworld.com
Also, here
NETGEAR RBKE960 series Wi-Fi 6E mesh system for quad band in Orbi Family
month, AMD is celebrating the fifth anniversary of the disruptive “Zen” architecture, looking back over the last half-decade of development, innovation and leadership across the consumer and comme...
www.guru3d.com
