US Dept of Just Virus Will Not Go Away

Status
Not open for further replies.
M

mbaynes

New Member
Thread author
Verified
May 31, 2013
36
0
7
54
Can't not remove US Dept of Justice Ransom virus - after trying various suggested methods.
 

Attachments

Hi and welcome to the malwaretips.com forums!

I'm Kuttus and I am going to try to assist you with your problem. Please take note of the below:
  • I will start working on your malware issues, this may or may not, solve other issues you have with your machine.
  • The fixes are specific to your problem and should only be used for this issue on this machine!
  • The process is not instant. Please continue to review my answers until I tell you your machine is clear. Absence of symptoms does not mean that everything is clear.
  • If you don't know, stop and ask! Don't keep going on.
  • Please reply to this thread. Do not start a new topic.
  • Refrain from running self fixes as this will hinder the malware removal process.
  • It may prove beneficial if you print of the following instructions or save them to notepad as I post them.
Your security programs may give warnings for some of the tools I will ask you to use. Be assured, any links I give are safe.


Before we start:
Please be aware that removing malware is a potentially hazardous undertaking. I will take care not to knowingly suggest courses of action that might damage your computer. However it is impossible for me to foresee all interactions that may happen between the software on your computer and those we'll use to clear you of infection, and I cannot guarantee the safety of your system. It is possible that we might encounter situations where the only recourse is to re-format and re-install your operating system, or to necessitate you taking your computer to a repair shop.

Because of this, I advise you to backup any personal files and folders before you start.
<hr />

Can you please try to run a scan with Farbar Recovery Scan Tool. You will need a USB (Flash) pendrive.

For x32 (x86) bit systems download Farbar Recovery Scan Tooland save it to a flash drive.
For x64 bit systems download Farbar Recovery Scan Tool x64 and save it to a flash drive.

Plug the flashdrive into the infected PC.

Enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:
  • Restart the computer.
  • As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
  • Click on Repair your computer menu item.
  • Select US as the keyboard language settings, and then click Next.
  • Select the operating system you want to repair, and then click Next.
  • Select your user account and click Next.
On the System Recovery Options menu you will get the following options:
Startup Repair
System Restore
Windows Complete PC Restore
Windows Memory Diagnostic Tool
Command Prompt
  • Select Command Prompt
  • In the command window type in notepad and press Enter.
  • The notepad opens. Under File menu select Open.
  • Select "Computer" and find your flash drive letter and close the notepad.
  • In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter
    Note: Replace letter e with the drive letter of your flash drive.
  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) in the flash drive. Please copy and paste it to your reply.
 
Working on the steps you provided. Should have log file posted soon.

Thanks
 
I've ran the procedure you requested and here is the resulting log file.
 

Attachments

Booting into normal mode returned me to the DOJ Ransom screen.
 
STEP 1: Run a scan with AdwCleaner

<ol><li>Download AdwCleaner from the below link.
<><a href="http://general-changelog-team.fr/fr/downloads/finish/20-outils-de-xplode/2-adwcleaner" target="_blank">ADWCLEANER DOWNLAOD LINK</a></> (This link will automatically download Security Check on your computer)</li>

<li>Close all open programs and internet browsers.</li>
<li>Double click on <>adwcleaner.exe</> to run the tool.</li>
<li>Click on <>Delete</>,then confirm each time with <>Ok</>.</li>
<li>Your computer will be rebooted automatically. A text file will open after the restart.</li>
<li>Please post the contents of that logfile with your next reply.</li>
<li>You can find the logfile at <>C:\AdwCleaner[S1].txt</> as well.</li>
</ol>
<hr/>
STEP 2: Run a scan with Junkware Removal Tool

Please download Junkware Removal Tool to your desktop from here
  • Turn off your antivirus software now to avoid potential conflicts
  • Double-click to run the tool. For Windows Vista or 7 users, right-click the file and select Run as Administrator
  • The tool will open and start scanning your system
  • Please be patient as this can take a while to complete depending on your system's specifications
  • On completion, a log (JRT.txt) will be saved to your desktop and will automatically open
  • Post the contents of JRT.txt into your next reply


Download Malwarebytes Anti-Rootkit from here to your Desktop
  • Unzip the contents to a folder on your Desktop.
  • Open the folder where the contents were unzipped and run mbar.exe
  • Follow the instructions in the wizard to update and allow the program to scan your computer for threats.
  • Make sure there is a check next to Create Restore Point and click the Cleanup button to remove any threats. Reboot if prompted to do so.
  • After the reboot, perform another scan with Malwarebytes Anti-Rootkit to verify that no threats remain. If there are threats, click Cleanup once more and reboot.
  • When done, please post the two logs in the MBAR folder(mbar-log.txt and system-log.txt)


Please download Malwarebytes' Anti-Malware to your desktop.
  • Double-click mbam-setup.exe and follow the prompts to install the program.
  • At the end, be sure a checkmark is placed next to
    • Update Malwarebytes' Anti-Malware
    • and Launch Malwarebytes' Anti-Malware
  • then click Finish.
  • If an update is found, it will download and install the latest version.
  • When it prompts you to try their 30-day trail, click decline
  • Once the program has loaded, select Perform quick scan, then click Scan.
  • When the scan is complete, click OK, then Show Results to view the results.
  • Be sure that everything is Checked (ticked) except items in the C:\System Volume Information folder and click on Remove Selected.
  • When completed, a log will open in Notepad. please copy and paste the log into your next reply
    • If you accidently close it, the log file is saved here and will be named like this:
    • C:\Documents and Settings\Username\Application Data\Malwarebytes\Malwarebytes' Anti-Malware\Logs\mbam-log-date (time).txt

 
Last edited by a moderator:
The instructions you provided indicate to download the various tools to the desktop and run them. However, I unable to get to the desktop because of the ransom screen.

What is the recommend way to run these tools given I'm unable to get to the desktop?

thanks
 
Please run this scan once again......

Can you please try to run a scan with Farbar Recovery Scan Tool. You will need a USB (Flash) pendrive.

For x32 (x86) bit systems download Farbar Recovery Scan Tooland save it to a flash drive.
For x64 bit systems download Farbar Recovery Scan Tool x64 and save it to a flash drive.

Plug the flashdrive into the infected PC.

Enter System Recovery Options.

To enter System Recovery Options from the Advanced Boot Options:
  • Restart the computer.
  • As soon as the BIOS is loaded begin tapping the F8 key until Advanced Boot Options appears.
  • Click on Repair your computer menu item.
  • Select US as the keyboard language settings, and then click Next.
  • Select the operating system you want to repair, and then click Next.
  • Select your user account and click Next.
On the System Recovery Options menu you will get the following options:
Startup Repair
System Restore
Windows Complete PC Restore
Windows Memory Diagnostic Tool
Command Prompt
  • Select Command Prompt
  • In the command window type in notepad and press Enter.
  • The notepad opens. Under File menu select Open.
  • Select "Computer" and find your flash drive letter and close the notepad.
  • In the command window type e:\frst.exe (for x64 bit version type e:\frst64) and press Enter
    Note: Replace letter e with the drive letter of your flash drive.
  • The tool will start to run.
  • When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) in the flash drive. Please copy and paste it to your reply.
 
OK, I'll run the scan again. I have 3 different user accounts on the machine does it matter which user account the scan is ran under?

The previous scan was ran under the administrator account.
 
kuttus said:
It is not Normal to save folders and files inside Downloads Folder.. That's y.... :)

Are you able to see the Desktop Icons in any User Account?
Click to expand...

No, each account is blocked by the ransom screen.
 
Okay......

Lets create a bootable HitmanPro Rescue Disk and run a scan:
STEP 1: Create a HitmanPro.Kickstart USB flash drive
<ol>
<li>While you are using a "clean" (non-infected) computer, <>download HitmanPro</> from the below link.
<a href="http://www.surfright.nl/en/hitmanpro/" rel="nofollow" target="_blank"> <>HITMANPRO DOWNLOAD LINK</></a> <em>(This link will open a download page in a new window from where you can download HitmanPro)</em></li>
<li>Insert your USB flash drive into your computer and then follow the instructions from the below video:
<iframe src="http://www.youtube.com/embed/aBS902Qr0oc?rel=0" frameborder="0" width="640" height="360"></iframe></li>
</ol>
STEP 2: Remove infection with HitmanPro.Kickstart
<ol>
<li>After you have create the HitmanPro.Kickstart USB flash drive, you can <>insert this USB drive into the infected machine</> and start your computer</li>
<li>Once the computer starts <>repeatedly tap the F11 key </>(on some machines its <em>F10</em> or <em>F2</em>),which should bring up the Boot Menu, from there you can select to boot from your USB.
Next,you'll need to <>perform a system scan with HitmanPro</> as see in the below video:
<iframe src="http://www.youtube.com/embed/lUNHidkYsDQ?rel=0" frameborder="0" width="640" height="360"></iframe></li>
</ol>

<hr />
 
Last edited by a moderator:
Status
Not open for further replies.

You may also like...