Infection date and initial symptoms
2-17-2015 ran Mawarebytes quarantined files
Current issues and symptoms
2/18/2015 restarted computer as suggested after quarantine. Now cannot connect to server. Message says: "Unable to connect to proxy server"
Steps taken in order to remove the infection
Not techie. So nothing done. Cannot load Farbar Recovery Scan Tool because can't connect to Internet. Currently using an iPad

TwinHeadedEagle

Moderator
Verified
Staff member
Hello,



They call me TwinHeadedEagle around here, and I'll be working with you.



Before we start please read and note the following:
  • At the top of your post, please click on the "Watch thread" button and make sure to check Watch this thread...and receive email notifications. This will send an email to you as soon as I reply to your topic, allowing me to solve your problem faster.
  • Please do not install any new software during the cleaning process other than the tools I provide for you. This can hinder the cleaning process. Please do not perform System Restore or any other restore.
  • Instructions I give to you are very simple and made for complete beginner to follow. That's why you need to read through my instructions carefully and completely before executing them.
  • Please do not run any tools other than the ones I ask you to, when I ask you to. Some of these tools can be very dangerous if used improperly. Also, if you use a tool that I have not requested you use, it can cause false positives, thereby delaying the complete cleaning of your machine.
  • All tools we use here are completely clean and do not contain any malware. If your antivirus detects them as malicious, please disable your antivirus and then continue.
  • If during the process you run across anything that is not in my instructions, please stop and ask. If any tool is running too much time (few hours), please stop and inform me.
  • I visit forum several times at day, making sure to respond to everyone's topic as fast as possible. But bear in mind that I have private life like everyone and I cannot be here 24/7. So please be patient with me. Also, some infections require less, and some more time to be removed completely, so bear this in mind and be patient.
  • Please stay with me until the end of all steps and procedures and I declare your system clean. Just because there is a lack of symptoms does not indicate a clean machine. If you solved your problem yourself, set aside two minutes to let me know.
  • Please attach all report using
    button below. Doing this, you make it easier for me to analyze and fix your problem.

  • Do not ask for help for your business PC. Companies are making revenue via computers, so it is good thing to pay for the repair.
  • If I don't hear from you within 3 days from this initial or any subsequent post, then this thread will be closed.




Rules and policies

We won't support any piracy.
That being told, if any evidence of illegal OS, software, cracks/keygens or any other will be revealed, any further assistance will be suspended. If you are aware that there is this kind of stuff on your machine, remove it before proceeding!
The same applies to any use of P2P software: uTorrent, BitTorrent, Vuze, Kazaa, Ares... We don't provide any help for P2P, except for their removal. All P2P software has to be uninstalled or at least fully disabled before proceeding!

Failure to follow these guidelines will result with closing your topic and withdrawning any assistance.




Scan with Farbar Recovery Scan Tool

Please download Farbar Recovery Scan Tool and save it to your desktop.

Note: You need to run the version compatibale with your system. If you are not sure which version applies to your system download both of them and try to run them.
Only one of them will run on your system, that will be the right version.


  • Double-click to run it. When the tool opens click Yes to disclaimer.
  • Press Scan button.
  • It will make a log (FRST.txt) in the same directory the tool is run. Please attach it to your reply.
  • The first time the tool is run, it makes also another log (Addition.txt). Please attach it to your reply.
 

Denise Young

New Member
Hi. You might get mad. I don't have logs because I just uninstalled the Malwarebytes program. Still can't access internet and still don't understand the proxy stuff. After restarting after the uninstall. Still can't access internet. I looked at some of the similar posted suggestions.
 

Attachments

TwinHeadedEagle

Moderator
Verified
Staff member
Multiple Resident Protection warning!

Always have one (and no more than one!) AntiVirus program! In this case having more of them will not provide you with better protection - instead they may cause slowness, lock-ups and even mark another ones as harmful, leading to leave your system unstable and even damaged. Please choose only one from the listed below to stay with and uninstall the others:
  • avast! Antivirus
  • McAfee Anti-Virus and Anti-Spyware

Uninstallation procedure:
  • Press the
    + R on your keyboard at the same time. Type appwiz.cpl and click OK.
  • Search for each uninstalled entry, right-click it and select Uninstall.
This should be done until any other steps will be taken.




Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

  • Right-click on
    icon and select
    Run as Administrator to start the tool.
    (XP users click run after receipt of Windows Security Warning - Open File).
  • Press the Fix button just once and wait.
  • If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  • When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.



Fix with AdwCleaner

Please download AdwCleaner by Xplode and save the file to your Desktop.
  • Right-click on
    icon and select
    Run as Administrator to start the tool.
  • Wait until the database is updated.
  • Accept the Terms of use and click Scan.
  • When finished, please click Clean.
  • Upon completion, click Report. A log (AdwCleaner[S*].txt) will open.

Please include the contents of that file in your reply.

Note: Reports will be saved in your system partition, usually at C:\Adwcleaner
 

Attachments

Denise Young

New Member
Thank you so much.

I removed Avast.

When I downloaded the AdwCleaner I must have picked up a search engine called Binkiland which is tenacious as heck to remove. It prevails over my Chrome....Can I use the FRST and AdwCleaner on Binkiland as well. Sorry to be such a pain in the @#$@.

What occasion and how often can I use FRST and AdwCleaner?

The internet is up and running....... so thankful to you!!!
 

Attachments

TwinHeadedEagle

Moderator
Verified
Staff member
You shouldn't use FRST on your own. But you can use Adwcleaner as much as you like :)



Glad I could help. We will delete all used tools and I'll give you some tips to harden your security and learn how to protect yourself :)


Recommended reading:
MUST READ - security tips:

MUST READ - general maintenance:


The Importance of Software Updating:

In order to stay protected it is
very important that you regularly update all of your software. Cybercriminals depend on the apathy of users around software updates to keep their malicious endeavor running.

Operating systems, such as Windows, and applications, such as Adobe Reader or JAVA, are used by tens of millions of computers and devices around the world, making them a huge target for cybercriminals. Downloading updates and installing them can sometimes be tedious, but the advantages you get from the updates are certainly worth it.




Recommended additional software:
TFC - to clean unneeded temporary files.
Malwarebytes' Anti-Malware - to scan your system from time to time in search for malware.
Malwarebytes' Anti-Exploit - to prevent plenty of mostly exploited vulnerabilities.
McShield - to prevent infections spread by removable media.
Unchecky - to prevent from installing additional foistware, implemented in legitimate installations.
Adblock - to surf the web without annoying ads!



Post-cleanup procedures:


Download DelFix by Xplode and save it to your desktop.
  • Run the tool by right click on the
    icon and Run as administrator option.
  • Make sure that these ones are checked:
    • Remove disinfection tools
    • Purge system restore
    • Reset system settings
  • Push Run and wait until the tool completes his work.
  • All tools we used should be gone. Tool will create an report for you (C:\DelFix.txt)
The tool will also record healthy state of registry and make a backup using ERUNT program in %windir%\ERUNT\DelFix
Tool deletes old system restore points and create a fresh system restore point after cleaning.



My help is free for everybody.
If you're happy with the help provided and/or wish to buy me a beer for the assistance you received, then you can consider a donation:
Thank you!​




Stay safe,
TwinHeadedEagle :)
 

Denise Young

New Member
I noticed that I'm getting a great number of pop-ups. Could it be with the Adwcleaner? That download had a lot of suspicious ads during the download....Like installing Binkiland as my internet surf engine....Do I need to run the Adwcleaner again because of the pop ups?
 

TwinHeadedEagle

Moderator
Verified
Staff member
Scan with Farbar Recovery Scan Tool

Please re-run Farbar Recovery Scan Tool to give me a fresh look at your system.
  • Right-click on
    icon and select
    Run as Administrator to start the tool.
    (XP users click run after receipt of Windows Security Warning - Open File).
  • Make sure that Addition option is checked.
  • Press Scan button and wait.
  • The tool will produce two logfiles on your desktop: FRST.txt and Addition.txt.
Please include their content into your next reply.
 

TwinHeadedEagle

Moderator
Verified
Staff member
Uninstall some programs

We need to uninstall some unwanted/unneeded programs.
  • Press the
    + R on your keyboard at the same time. Type appwiz.cpl and click OK.
  • Search there for each entry mentioned below, right-click the entry and click Uninstall one at a time
The list of programs to uninstall:
  • AdwCleaner Packages
  • Binkiland
  • Buzzdock
  • Strong Signal
After completing uninstalls, please manually reboot your machine!

Note: If you get the message like: An error occurred while trying to uninstall, just press Yes.




Fix with Farbar Recovery Scan Tool

This fix was created for this user for use on that particular machine.

Running it on another one may cause damage and render the system unstable.

Download attached fixlist.txt file and save it to the Desktop:

Both files, FRST and fixlist.txt have to be in the same location or the fix will not work!

  • Right-click on
    icon and select
    Run as Administrator to start the tool.
    (XP users click run after receipt of Windows Security Warning - Open File).
  • Press the Fix button just once and wait.
  • If for some reason the tool needs a restart, please make sure you let the system restart normally. After that let the tool complete its run.
  • When finished FRST will generate a log on the Desktop, called Fixlog.txt.

Please attach it to your reply.
 

Attachments

Denise Young

New Member
After running the fix, I couldn't get onto the internet again. I noticed that my HP Support Assistant was telling me that I need to download updates and reload drivers. I'm doint that on the troublesome PC and currently writing to you and sending the Fixlog on another working pc.
 

Attachments

TwinHeadedEagle

Moderator
Verified
Staff member
Scan with Farbar Recovery Scan Tool

Please re-run Farbar Recovery Scan Tool to give me a fresh look at your system.
  • Right-click on
    icon and select
    Run as Administrator to start the tool.
    (XP users click run after receipt of Windows Security Warning - Open File).
  • Make sure that Addition option is checked.
  • Press Scan button and wait.
  • The tool will produce two logfiles on your desktop: FRST.txt and Addition.txt.
Please include their content into your next reply.