How to block ICMP Echo Reply with UTM 9.

[eonline]

Describe the problem

NO block icmp echo reply.

What have you tried?

Ask.

Hi, I'm trying to pass the shields up test but it always does the test on my router not on my firewall. If anyone can help me solve this problem very grateful in advance.

Post data: I asked in another forum but do not know how to answer. Thank you.

 

[509322]

You have to set up port-forwarding from your router to the PC that you want to test.

Research it.

 

[eonline]

invalid ip adress.

 

[eonline]

In my router are the options that only my ISP wants, does not give rise to changes by users.

 

[509322]

In my router are the options that only my ISP wants, does not give rise to changes by users.

Ask your ISP for portforwarding instructions.

 

[ForgottenSeer 69673]

Did you try typing 192.168.0.1 in your browser address bar?

 

[ForgottenSeer 58943]

Hi, I'm trying to pass the shields up test but it always does the test on my router not on my firewall. If anyone can help me solve this problem very grateful in advance.

Post data: I asked in another forum but do not know how to answer. Thank you.

So you are wanting to bypass your router/firewall/utm and see how your desktop software firewall response to ICMP? Hopefully I am understanding what you want here.

If that's the case, get the gateway of your ISP modem/router via whatismyip in google. Then connect to a hotspot or external network, or even a VPN then try to ping back to your WAN, does it respond? If it doesn't respond then you need to either bridge your isp gear, set disable firewall for true static, or go into settings and enable ICMP passthrough. After that you need to pass ICMP through your UTM 9 or set your local (LAN) IP for bypass/DMZ then rerun the test.

That's pretty much all you need to do either way, but if your ISP is force blocking ICMP and you can't get into it to make changes then you are pretty much out of luck.

 

[509322]

So you are wanting to bypass your router/firewall/utm and see how your desktop software firewall response to ICMP? Hopefully I am understanding what you want here.

If that's the case, get the gateway of your ISP modem/router via whatismyip in google. Then connect to a hotspot or external network, or even a VPN then try to ping back to your WAN, does it respond? If it doesn't respond then you need to either bridge your isp gear, set disable firewall for true static, or go into settings and enable ICMP passthrough. After that you need to pass ICMP through your UTM 9 or set your local (LAN) IP for bypass/DMZ then rerun the test.

That's pretty much all you need to do either way, but if your ISP is force blocking ICMP and you can't get into it to make changes then you are pretty much out of luck.

The OP doesn't understand any of that... he needs step-by-step, "How To" instructions.

 

[eonline]

I asked my ISP for Port-forwarding, bridge mode and DMZ and they can't do it. And any change I make from the router is automatically cancelled.

 

[Bleak]

How did you come to know for sure that changes gets 'canceled'?
Try google search like: <router name with model> port forwarding.
We can't help you for on a detailed instructions since we don't know your router model and routers tend to have a bit difference on doing some tasks.

 

[eonline]

The changes are cancelled because I'm tired of ticking the option WAN blocking and a few days is unbranded.

 

[ForgottenSeer 58943]

I asked my ISP for Port-forwarding, bridge mode and DMZ and they can't do it. And any change I make from the router is automatically cancelled.

This means your ISP is pushing the config out to you and they have pattern that they push to every customer to default the modem/router and if needed reload the statics and configurations. This helps reduce service calls from customers and is usually pushed between 24-72 hours in the middle of night or very early morning hours.

Unfortunately, unless they agree to allow you to make changes, and then agree to stop pushing configs to you there isn't much you can do EXCEPT - do they allow you to utilize your own modem? ISP's won't (and cannot legally) push configs to CPE (customer provided equipment) so you'll be out from under the watchful and controlling gaze if you can replace their gear. That is provided they authorize your own gear. Most ISP's have a list of supported equipment you can purchase.

 

[eonline]

Hi, I switched to the xg firewall home. But the problem remains the same. Greetings and thanks.

 

[Yellowing]

Hi.
He meant you should change the hardware, not the software. Buy a good router and use it instead, if that is possible.
Switching the software does not help with WAN pings. (as long as its the software on your PC and not the on the router)