New Update Hasleo Backup Suite launches with file backups and other improvements

[i7ii]

Tried to recreate - the mistake... and

Ok my blame...but again, I didn't see any type of warnings when restoring.

Tried to re-create your mistake.

Let's say we have C:/ Partition labeled as "Windows " and D:/ Partition labeled as "Warehouse"

"Disk Mode" is now called "System Mode". And that's what's selected by Default. Normally, this too should work - if you don't touch anything (if the C:/Partition is shown as Yellow/Selected having the Windows Label - while D:/ is shown as Grey/Unselected having the Warehouse label).

BUT... for some stupid reason - "it allows you to click on the Disk (in first panel with Next - before the one where you can Proceed) - and when you end-up in the Proceed panel - your C:/Partition is still shown as Yellow/Selected - but D:/ is shown as Grey/Unselected AND "Unallocated".

Thus, if you missed the Unaloocated space part for D:/ Partition - it's quite likely that it will do as it says: restore C:/ and clear D:/

On the other hand, if you switch to Partition Mode - clicking on Disk - nothing happens (like with System Mode) - nothing happens, since you can only select a Partition and the others remain intact. Tho, pretty sure most people - use default (System Mode) - and they didn't click on Disk by accident.

Seriously, this shouldn't be possible - it's a bad design (leaves room for a meaningless Risk).

 

[VladDracul]

Tried to recreate - the mistake... and

Tried to re-create your mistake.

Let's say we have C:/ Partition labeled as "Windows " and D:/ Partition labeled as "Warehouse"

"Disk Mode" is now called "System Mode". And that's what's selected by Default. Normally, this too should work - if you don't touch anything (if the C:/Partition is shown as Yellow/Selected having the Windows Label - while D:/ is shown as Grey/Unselected having the Warehouse label).

BUT... for some stupid reason - "it allows you to click on the Disk (in first panel with Next - before the one where you can Proceed) - and when you end-up in the Proceed panel - your C:/Partition is still shown as Yellow/Selected - but D:/ is shown as Grey/Unselected AND "Unallocated".

Thus, if you missed the Unaloocated space part for D:/ Partition - it's quite likely that it will do as it says: restore C:/ and clear D:/

On the other hand, if you switch to Partition Mode - clicking on Disk - nothing happens (like with System Mode) - nothing happens, since you can only select a Partition and the others remain intact. Tho, pretty sure most people - use default (System Mode) - and they didn't click on Disk by accident.

Seriously, this shouldn't be possible - it's a bad design (leaves room for a meaningless Risk).

Probably this is the logic explanation for what happened to my D drive. Thanks.Will look into it and maybe....i will give Hasleo another shot. (now that I have a full backup of D partition on an external HD lol...just in case ).

 

[SeriousHoax]

Hasleo once broke for me (destroyed all SSD partitions) too while restoring that I shared in this thread previously. But before that I restored at least 20 times without an error. So, I guess s**t happens. After that I returned to Aomei backupper free but it cannot detect my Linux's efi and boot partitions, but Hasleo can, so I returned to Hasleo again. Hasleo is great and offers almost every feature you would need for free. Hopefully, nothing catastrophic is going to happen again.

 

[silversurfer]

Hasleo Backup Suite 5.2 (stable version)

Hasleo Backup Suite V5.2 Released!

What's new in this version:
1. Allows changing the priority of the backup process
2. Allows disk backup images to be mounted in writable mode
3. Allows month selection in monthly backup schedule
4. Allows to change the compression level of backup tasks created by V5.0
5. Allows to cancel backup task, show and hide windows from the system tray
6. Allows to hide the backup progress window
7. Automatically extend partitions during disk layout
8. Display the backup progress in the taskbar icon
9. Various other bug fixes and feature improvements

Here is the download link:
https://www.easyuefi.com/backup-software...e_Free.exe

Source: Hasleo Backup Suite V5.2 Released!

 

[silversurfer]

Hasleo Backup Suite 5.2.2.1 (stable)

Hasleo Backup Suite V5.2.2.1 Released!

What's new in this version:
1. Improved disk cloning to ensure that Windows boots properly on the cloned disk
2. Allows to change the storage path of the backup tasks
3. Improved the feature of checking image files
4. Improved creation of WinPE media
5. Czech language support
6. Various other bug fixes and feature improvements

Here is the download link:
https://www.easyuefi.com/backup-software...e_Free.exe

Source: Hasleo Backup Suite V5.2.2.1 Released!

 

[silversurfer]

Hasleo Backup Suite V5.2.2.2 Released!

What's new in this version:
1. Fixed an issue that caused the service program to crash
2. Fixed an issue that caused disk backups to fail
3. Fixed an issue that caused file restoration to fail
4. Fixed an issue that caused the progress of checking image files to be incorrect
5. Fixed an issue where Hyper-V didn't work after rebuilding WMI
6. Fixed an issue where months may not be automatically selected in the monthly schedule

Here are the download links:
X86/X64
ARM64

Source: Hasleo Backup Suite V5.2.2.2 Released!

 

[silversurfer]

Hasleo Backup Suite V5.2.2.3 Released!

What's new in this version:
1. Fixed an issue where drives might not be assigned drive letters in WinPE
2. Fixed an issue that prevented changing backup task destination paths
3. Fixed an issue with the image merge functionality
4. Fixed an issue that could cause slow shutdown
5. Fixed other minor bugs

Here are the download links:
X86/X64
ARM64

Hasleo Backup Suite V5.4.2.0 Released!

 

[lokamoka820]

Hasleo Backup Suite Free 5.4.2.0
Jun 13, 2025

• Added backup image delete feature
• Added storage path management feature
• Improved file backup feature
• Show application notifications in Windows Notification Center
• Various other bug fixes and feature improvements

Hasleo Backup Suite V5.4.2.0 Released!

Here are the download links:
X86/X64
ARM64

 

[lokamoka820]

Hasleo Backup Suite Free 5.4.2.1
Jun 20, 2025

Hasleo Backup Suite V5.4.2.1 Released!

What's new in this version:
1. The program crashes when sending emails
2. Application notifications cannot be displayed in the Windows Notification Center
3. Updated Italian and German translations
4. Fixed other minor bugs

Here are the download links:
X86/X64
ARM64

Hasleo Backup Suite V5.4.2.1 Released!

 

[silversurfer]

Hasleo Backup Suite 5.4.2.2

Hasleo Backup Suite V5.4.2.2 Released!

What's new in this version:
1. Fixed bug: Failed to enumerate dynamic disks in some cases
2. Fixed bug: Unable to back up USB flash drives in WinPE
3. Fixed bug: "The system cannot find the path specified." error occurred when changing task path
4. Updated Spanish and Swedish translations
4. Fixed other minor bugs

Here are the download links:
X86/X64
ARM64

Hasleo Backup Suite V5.4.2.2 Released!

(06-21-2025, 11:24 PM)al3x Wrote: (06-21-2025, 09:55 PM)Froggie Wrote: My original version download issue occurred using two different browsers... two different caches. One of them I never use for thi

www.easyuefi.com

 

[Sorrento]

Thank you ! - Never failed me yet & as I try new software & often image back I have used it lots of times

 

[Virtuoso]

What is the difference between System backup and Disk Backup? Here is the screenshot of my Disk management, I want to backup my first SSD (Disk 0):

 

[pxxb1]

What is the difference between System backup and Disk Backup? Here is the screenshot of my Disk management, I want to backup my first SSD (Disk 0):


View attachment 290239

System backs up the partitions that is the Os, no exclusion option. Those partitions that was created by the installation of the Os.

Disk backup backs up the whole disc, exclusion option possible. That means including the added partitions created by the user after the initial installation. If you want the content from the OEM to be backed up as well you probably have to use Disk backup.

But HBS will show you what is being backed up very clearly before you commit.

 

[n8chavez]

Be aware that uefi partitions cannot be backed up using the "system" option. That's the case with me. I have to use the "partition" option because of this, if I want everything backed up.

 

[Virtuoso]

Thanks for the comments, I checked it and the system backup does not cover the Recovery partition and OEM partition, Disk partition covers everything.

 

[pxxb1]

New version out.

 

[silversurfer]

Hasleo Backup Suite V5.4.2.3 Released!

What's new in this version:
1. Fixed bug: Failed to back up unlocked BitLocker-encrypted drives without assigned drive letters
2. Fixed bug: Fixed the issue where system backups failed due to partition information changes
3. Fixed bug: Fixed issues that caused file backups to fail
4. Fixed bug: Unable to access shared folders properly in some cases
5. Fixed bug: Failed to create WinPE media in some cases
6. Fixed other minor bugs

Here are the download links:
X86/X64
ARM64

Hasleo Backup Suite V5.4.2.3 Released!

(08-18-2025, 12:42 PM)admin Wrote: (08-18-2025, 07:06 AM)Almighty1 Wrote: With Hasleo_Backup_Suite_Free_250816.exe, it appears that the unlocked Bitlocker partition which was actually encrypted was ba

www.easyuefi.com

 

[Sorrento]

I tried the new version last night, there was a change is the amount of time it took to examine the system (as long as the actual imaging) before starting the backup, when the backup started the actual imaging took the same as usual, whether this is deliberate or a bug I don't know, it may well be done deliberately? - Just took twice as long though, not sure how this will effect users with slower machines, but will be interested?

 

[Back3]

I tried the new version last night, there was a change is the amount of time it took to examine the system (as long as the actual imaging) before starting the backup, when the backup started the actual imaging took the same as usual, whether this is deliberate or a bug I don't know, it may well be done deliberately? - Just took twice as long though, not sure how this will effect users with slower machines, but will be interested?

I tried an incremental backup: it took 10 seconds to check the system and about 2 minutes to make the backup. Works as usual. Model: 12th GEN Intel (R) Core (TM) 1.7-1255U

 

[Sorrento]

Interesting, not an issue I just wondered if others saw any difference as normally it does a system check almost instant & a full C:\ backup in 17-18 seconds, now its about 30 seconds all told, I don't use incremental - Maybe the program is examining the system more carefully to prevent errors as looking at the change-log? A great imaging program as good as Reflect IMO I used until this year & has never let me down once!