Assigned Join Zemana Beta Group

[ForgottenSeer 69673]

Settings>>> check for updates. The current is 495.

Yes there is a bug see post above.

 

[ForgottenSeer 69673]

Does this beta need to be activated? If so how? I have submitted feedback but never got a key in my Gmail.

 

[oldschool]

Got a toast notification for version 495 update. Updated with no issues. Scanned again with no FPs.

@ticklemefeet - You don't get a key. You can update from the Home interface, lower left corner under "Real-time Protection" there is a small refresh link right next to "Version update".

This is more Alpha than Beta!

 

[ZAM3_PO]

Does this beta need to be activated? If so how? I have submitted feedback but never got a key in my Gmail.

Hi @ticklemefeet, could you send me a private message on this?

 

[ZAM3_PO]

Hi @ZAM3_PO

Thank you very much for your Infos

I have uninstalled the last Final Version

I will check that the folder is removed can you you say where can I find the Driver File

And can I use my license Code into the ZAM 3 Version

With best Regards
Mops21

Hi @Mops21, You may locate and delete these two files in case it is not already deleted when you restart.

C:\Windows\System32\drivers\amdrv.sys
C:\Windows\System32\drivers\zam64.sys or C:\Windows\System32\drivers\zam32.sys

However, if you want to clean install ZAM 3.0, i would like to recommend you to uninstall both 2.0 and 3.0 first, then restart device, clean driver files (if not already deleted) and then lastly install ZAM 3.0 again.

Let me know if you need further assistance.

Happy to help

 

[ZAM3_PO]

Two false positives i think:
First one could be because i use simple dns crypt *guessing*
Second one because i created a shortcut for Firefox with sandboxie.

This still applies to Version 3.0.495 was to lazy to get a new screenshot after the update.

Thank you very much @Freki123 , Could you kindly submit a feedback through UI if you havent already? Thanks!

 

[ZAM3_PO]

3.0.495 gives me same installSDK failed error.​

Also even it doesn't install it adds:​

• C:\Windows\System32\drivers\amdrv.sys​
• HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\amdrv​

Hi @overdivine, you may try clean install of ZAM 3.0 as suggested in my reply to Mops21. In case you want to keep 2.0 as well, could you kindly send a feedback on UI so i can investigate and try to assist you?

Thanks!

 

[ZAM3_PO]

System.EnterpriseServices.Wrapper.dll after scan shows as suspicious: src!P

I took a not on this. We will check and fix it if necessary. Thanks a bunch for your feedback!

 

[Mops21]

Hi @Mops21, You may locate and delete these two files in case it is not already deleted when you restart.

C:\Windows\System32\drivers\amdrv.sys
C:\Windows\System32\drivers\zam64.sys or C:\Windows\System32\drivers\zam32.sys

However, if you want to clean install ZAM 3.0, i would like to recommend you to uninstall both 2.0 and 3.0 first, then restart device, clean driver files (if not already deleted) and then lastly install ZAM 3.0 again.

Let me know if you need further assistance.

Happy to help

Hi @ZAM3_PO

Thank you very much for your help and ansers

The Filepaths are clean but not this here see my 2 screenshots

And can I use my license for ZAM 3

With best Regards
Mops21

 

[ZAM3_PO]

Hi @ZAM3_PO

Thank you very much for your help and ansers

The Filepaths are clean but not this here see my 2 screenshots

And can I use my license for ZAM 3

With best Regards
Mops21

These files belong to ZAM 2.0. They should be removed automatically once you uninstall. Did you try uninstalling it?

For license, Yes, if you have a license working on ZAM 2.0 it should also work for 3.0 without taking a spot on your license capacity. In case you are experiencing any issues, please send a feedback on UI and we will assist you.

 

[Mops21]

These files belong to ZAM 2.0. They should be removed automatically once you uninstall. Did you try uninstalling it?

For license, Yes, if you have a license working on ZAM 2.0 it should also work for 3.0 without taking a spot on your license capacity. In case you are experiencing any issues, please send a feedback on UI and we will assist you.

Hi @ZAM3_PO

Thank you very much for your Infos

Yes I have uninstalled ZAM 2.0 and reboot my System and the Files did not removed why

With best Regards
Mops21[/QUOTE]

 

[pxxb1]

Formerly Zam/Zal always left some drivers after an unistall, put that on your "to do" list and fix that. It should remove everything.

What will happen to Zal, are you going to develop that to?

 

[ZAM3_PO]

Hi @ZAM3_PO

Thank you very much for your Infos

Yes I have uninstalled ZAM 2.0 and reboot my System and the Files did not removed why

With best Regards
Mops21

@Mops21, as @pxxb1 said, ZAM 2.0 leaves these files behind after uninstall however, these files are mostly log files and signature db and config files. You can safely delete these manually.

We will fix this in 3.0 in following releases.

As for ZAL, currently we are focusing on ZAM 3.0 and we dont have plans for ZAL in near feature. Nevertheless, we will also share more details about it in following blog posts. Make sure to follow our blog.

Thanks!

 

[Mops21]

@Mops21, as @pxxb1 said, ZAM 2.0 leaves these files behind after uninstall however, these files are mostly log files and signature db and config files. You can safely delete these manually.

We will fix this in 3.0 in following releases.

As for ZAL, currently we are focusing on ZAM 3.0 and we dont have plans for ZAL in near feature. Nevertheless, we will also share more details about it in following blog posts. Make sure to follow our blog.

Thanks!

Hi @ZAM3_PO and Hi @pxxb1

Thank you very much for your Infos

You can install ZAM 2 and uninstall with an uninstaller Programm as example iobit uninstaller and check that Files won not be delete or so

With best Regards
Mops21

 

[eonline]

I personally use FRST to clean traces of ZAM and ZAL. Best regards.

 

[Mops21]

Hi @ZAM3_PO

I have 2 screenshots for you that I make from the installer I use the german Version Installer that are 2 things not translated into german language please check and fix

Can you say when will you release the multilanguage Version of ZAM 3

With best Regards
Mops21

 

[Mops21]

I personally use FRST to clean traces of ZAM and ZAL. Best regards.

Hi @Lobito Punky

Can you send ne a Link to the FRST please

With best Regards
Mops22

 

[eonline]

Hi @Lobito Punky

Can you send ne a Link to the FRST please

With best Regards
Mops22

If you do not have knowledge in this program, I recommend that you do not use it as it could damage your pc. Best regards.
Download Farbar Recovery Scan Tool

 

[Mops21]

If you do not have knowledge in this program, I recommend that you do not use it as it could damage your pc. Best regards.
Download Farbar Recovery Scan Tool

Hi @Lobito Punky

Thank you very much for your Infos

No I have used it

With best Regards
Mops21

 

[brambedkar59]

The bug " Detection : Could not scan! ", seems to be fixed in 3.0.495